NEFF 4242004188278, Instruction Manual

en

    Automatic safety cut-out

38

2.

Touch the 

x

 symbol. 

A ü

above the 

x

 symbol 

flashes. 

‹‹ 

min

 lights up in the timer display. 

3.

Within the next 10 seconds, set the desired cooking 

time with the twist knob.

The cooking time counts down. If you have set a 

cooking time for several cooking positions, the shortest 

cooking time will be displayed. 

A ü

above the 

x

 symbol 

lights up. The 

x

 display for the cooking position lights 

up.

When the time has elapsed

When the cooking time has elapsed, the cooking 

position switches off. 

‹

 lights up in the cooking position 

display. An audible signal sounds. 

‹‹

 flashes for one 

minute in the timer display. The 

x

 display flashes.

Touch any control. The displays go out and the audible 

signal ceases.

Changing or cancelling the cooking time

Select the hotplate using the twist knob. Touch the 

x

symbol and change the cooking time or set to 

‹‹

.

Notes

■

If you want to query the remaining cooking time for a 

particular hotplate, select the hotplate with the twist 

knob. The cooking time appears for 10 seconds.

■

You can select a cooking time of up to 99 minutes.

■

If the cooking time has counted down to the last 

minute, the timer display changes from minutes to 

seconds.

Automatic timer

You can use this function to preselect a cooking time 

for all hotplates. Each time a hotplate is switched on, 

the pre-selected cooking time then counts down. When 

the cooking time has elapsed, the hotplate switches off 

automatically.
You can find out how to switch on the automatic timer in 

the Basic settings section.

~

 Page 39

Note: 

You can change the cooking time for a hotplate 

or switch off the automatic timer for the hotplates:

Select the hotplate and touch the 

x

 symbol. Change 

the cooking time or set to 

‹‹

 in the settings range.

Kitchen timer

You can use the kitchen timer to set a time of up to 99 

minutes. It runs independently of all the other settings.

Setting the kitchen timer

1.

Touch the 

U

 symbol. The display 

A

 above the 

U 

symbol flashes. 

‹‹

min

 lights up in the timer display.

2.

Use the twist knob to set the desired cooking time.

The timer starts counting down after a few seconds.

When the time has elapsed

When the time has elapsed, an audible signal sounds 

and 

‹‹

 flashes in the display for one minute. The 

A

display above the 

U

 symbol lights up. Touch any 

symbol. The displays go out and the audible signal 

ceases.

Setting the correct time

Touch the 

U

 symbol and use the twist knob to change 

the time.

Stopwatch function

The stopwatch function displays the time that has 

passed since activating the function.
The stopwatch function only works when the hob is 

switched on. When the hob is switched off, the 

stopwatch function is switched off as well.
The stopwatch function is switched on by touching the 

œ

 symbol. 

‹‹

 appears in the timer display and timing 

starts. Seconds are displayed during the first minute, 

and then minutes.
The stopwatch function is switched off by touching the 

œ

 symbol again. The timer display goes out.

Note: 

If another time-setting option is selected in 

addition to the stopwatch function, the setting appears 

in the timer display for 10 seconds. The stopwatch 

function is then displayed again.

b

Automatic safety cut-out

Automatic safety cut-out

If a hotplate has been switched on for a long time 

without the setting being changed, the automatic time 

limit is activated.
The hotplate stops heating. 

”‰

 and the 

•

/

œ

 residual 

heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You 

can make new settings.
When the time limit is activated depends on the heat 

setting selected (1 to 10 hours).

PLQ

PLQ