56
EasyClean
®
System
The oven cleaning function featured in your oven is
intended to help you keep your oven neat and tidy.
An amount of cleaning solution is vaporised
automatically. The combined effects of heat and
steam soften the soil deposits on the oven wall
enamel and facilitate their removal.
Caution:
Never pour cold water into the oven while it is still
hot.
The cleaning system can only be activated
when
the oven has cooled down completely
(room temperature).
Use normal water only, and
no distilled water.
Switching on:
1.
Take the baking sheet and the universal pan out
of the oven. The grill can remain in the oven.
2.
Carefully pour approx. 0.4 litres of water mixed
with a little dishwashing detergent into the floor
pan of the oven.
In the case of heavy soil build-up, you may wish
to allow the cleaning solution to soak in for a
while before you activate the cleaning function.
3.
Close the oven door.
4.
Tap the
(
button and select
EasyClean
in the
submenu.
EasyClean in operation
is indicated on the text
display. The cleaning aid runs automatically.
The programme ends after 21 minutes. A signal is
emitted and
EasyClean end
is indicated on the text
display.
Not possible?
flashes on the text display.
The oven has not cooled down fully.
Switch the oven off and wait until it has cooled down
to room temperature.
Restart EasyClean.
Summary of Contents for B 1664 Series
Page 1: ...Instructions for use B 1664 ...
Page 67: ......