NEFF B12S53.3GB, Instruction Manual

8

Before using the appliance for the first time

In this section, you can read about

■

How to set the clock after connecting up your appliance

■

How to clean your appliance before using it for the first time

Setting the clock

Note: 

When you press the 

KJ

 clock function button, you have 

3 seconds to set the clock using the rotary selector. Should this 

have been insufficient for you, you can amend the clock time 

later.

‹

:

‹‹

 flashes in the clock display.

1.

Briefly press the 

KJ

 clock function button to go to the 

setting mode.
The 

KJ

 and 

3

 symbols light up. 

‚ƒ

:

‹‹

 appears in the 

clock display.

2.

Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.

Changing the clock

To subsequently change the time, press the 

KJ

clock function 

button repeatedly until the 

KJ

 and 

3

 symbols light up again. 

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1.

Remove the accessories from the cooking compartment.

2.

Completely remove any residual packaging (e.g. chips of 

polystyrene) from the cooking compartment.

3.

Clean the accessories and cooking compartment with hot 

soapy water (see section: Cleaning and care).

4.

Keep the kitchen ventilated while the appliance is heating up.
Heat with Top/bottom heat 

%

 at 240 °C for 60 minutes.

5.

Afterwards, wipe the cooled cooking compartment with hot, 

soapy water.

6.

Clean the outside of the appliance with a soft, damp cloth 

and soapy water.

Operating the appliance

In this section, you can read about 

■

how to switch your appliance on and off

■

how to select an operating mode and temperature

Switching on the appliance

1.

Turn the operating mode selector until the desired operating 

mode is selected.

2.

Turn the temperature selector until the desired temperature is 

selected.

The 

r

 indicator lamp lights up while the appliance is heating 

up and during any subsequent heating.

Switching off the appliance

1.

Turn the operating mode selector back to the 

Û

 position.

2.

Turn the temperature selector back to the 

Ú

 position.

After the appliance is switched off, the cooling fan may 

continue to run.