25
Rapid drying:
1.
Leave the oven ajar, at an angle of
approximately 30 degrees.
2.
Turn the function selector to position
v
.
3.
Reduce the oven temperature with the
temperature selector until
50° C
is
displayed.
4.
Duration: approximately 5 minutes.
5.
Then switch the oven off.
Cleaning and Care
After deactivating the hydroclean
system:
Cleaning tips:
❑
Never leave the residual water in the
oven for any length of time, e.g.
overnight.
1.
Open the oven door and pick up the
remaining water with a large absorbent
sponge cloth.
2.
Using the detergent-soaked sponge
cloth, a soft brush or a nylon scrubber,
wipe off the oven interior.
Stubborn soil remnants can be removed
with a nylon scourer.
3.
Lime deposits may be removed with a
cloth soaked in vinegar.
4.
Wipe clean with clear water and dry with
a soft cloth (do not forget to wipe under
the oven door seal).
Cleaning tips:
❑
If the oven is heavily soiled, the
procedure may be repeated after the
oven has cooled.
❑
If the oven is heavily soiled with grease,
e.g. after roasting or grilling, we would
recommend rubbing any stubborn dirt
with detergent before activating the
oven cleaning function.
❑
After cleaning, leave the oven door ajar,
i.e., at a
30-degree angle, to allow the interior
enamel surfaces to dry thoroughly.
