NEFF B27CR22 1 Series, Instruction Manual

Cleaning function    

en

21

Finishing

As soon as self-cleaning has run through, a signal 

sounds. The appliance door cannot be opened until the 

5

 symbol goes out.

Once the cleaning function has ended

1.

Allow the cooking compartment to cool down.

2.

Wipe off any ash that has been left behind in the 

cooking compartment and around the appliance 

door with a damp cloth.

3.

If you have left an accessory inside the cooking 

compartment to be cleaned, remove it and wipe it 

down with a damp cloth.

4.

Lift the accessory support up at the front and remove 

it. 

~

 "Rails" on page 22

5.

Refit the shelf supports or pull-out rails. 

~

 "Rails" 

on page 22

EasyClean

The EasyClean cleaning aid makes it easier to clean the 

cooking compartment. Dirt is softened beforehand by 

vaporizing soapy water. It can then be removed more 

easily.

:

Warning – Risk of scalding! 

Water in a hot cooking compartment may create hot 

steam. Never pour water into the hot cooking 

compartment. 

Starting

Notes

■

The "EasyClean 

š

" cleaning aid can only be started 

once the cooking compartment is cold (room 

temperature) and the appliance door is closed.

■

Do not open the appliance door during operation. 

Doing this will interrupt the "EasyClean 

š

" cleaning 

aid.

1.

Remove the accessories from the cooking 

compartment.

2.

Mix 0.4 litres of water (not distilled water) with a drop 

of washing-up liquid and pour into the middle of the 

cooking compartment floor.

3.

Touch the 

#

 touch button.

4.

Touch the 

0

 touch button.

5.

Use the 

(

 or 

)

 button to select "EasyClean 

 š

".

6.

Use the 

&

 button to navigate to the next line.

7.

Touch the 

#

 touch button.

The appliance starts EasyClean. The remaining time 

appears on the display.

Finishing

As soon as the cleaning aid has finished, an audible 

signal sounds and the appliance ends the operation 

automatically. 
As soon as you open the appliance door, the interior 

lighting is switched on so that you can finish cleaning 

the cooking compartment more easily. The remaining 

water in the cooking compartment must be removed 

promptly. Do not leave the remaining water in the 

cooking compartment for a long time (e.g. overnight). 

The appliance must not be operated when the cooking 

compartment is still wet or damp.

Final cleaning

1.

Open the appliance door and remove the remaining 

water with an absorbent sponge cloth.

2.

Clean the smooth surfaces in the cooking 

compartment with a dish cloth or a soft brush. 

Stubborn residues can be removed using a stainless 

steel scouring pad.

3.

Remove limescale with a cloth soaked in vinegar. 

Then wipe with clean water and rub dry with a soft 

cloth (including under the door seal).

4.

Use the 

#

 touch button to switch off the appliance.

5.

Leave the appliance door ajar in the locking position 

(approx. 30°) for approx. 1 hour to allow the enamel 

surfaces in the cooking compartment to dry. 

Alternatively, you can also run the rapid drying 

function for the cooking compartment.

Running the rapid drying function for the cooking 

compartment

1.

After the cleaning aid process has finished, leave the 

appliance door ajar in the locking position (approx. 

30°).

2.

Touch the 

#

 touch button.

3.

Start CircoTherm hot air at 50 °C.

4.

After 5 minutes, switch off the appliance and close 

the appliance door.

Removing heavy deposits of dirt

You have several options for removing particularly 

stubborn deposits of dirt.

■

Leave the soapy water to work for some time before 

starting the cleaning aid.

■

Rub soapy water onto the dirt on the smooth 

surfaces before starting the cleaning aid.

■

Repeat the cleaning aid once the cooking 

compartment has cooled down.