NEFF B45M42NOGB, Instruction Manual

5

You can obtain further accessories from specialist retailers:

Note: 

The baking tray and universal pan may become distorted 

during use. This is caused by the considerable temperature 

differences acting on the accessories. This may happen when 

only a part of the accessory is covered with food or when 

frozen items such as pizza have been placed on the accessory.

Before using the appliance for the first time

In this section, you can read about

■

How to set the clock after connecting up your appliance

■

How to clean your appliance before using it for the first time

Setting the clock

Note: 

When you press the

KJ

 clock function button, you have 

3 seconds to set the clock using the rotary selector. Should this 

have been insufficient for you, you can amend the clock time 

later.

‹

:

‹‹

 flashes in the clock display.

1.

Briefly press the

KJ

 clock function button to go to the 

setting mode.
The

KJ

 and

3

 symbols light up. 

‚ƒ

:

‹‹

 appears in the 

clock display.

2.

Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.

Changing the clock

To subsequently change the time, press the

KJ

clock function 

button repeatedly until the

KJ

 and 

3

 symbols light up again. 

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1.

Remove the accessories from the cooking compartment.

2.

Completely remove any residual packaging (e.g. chips of 

polystyrene) from the cooking compartment.

3.

Clean the accessories and cooking compartment with hot 

soapy water (see section: Cleaning and care).

4.

Heat with 

3

 CircoTherm® at 240 °C for 30 minutes.

5.

Afterwards, wipe the cooled cooking compartment with hot, 

soapy water.

6.

Clean the outside of the appliance with a soft, damp cloth 

and soapy water.

Operating the appliance

In this section, you can read about 

■

how to switch your appliance on and off

■

how to select an operating mode and temperature

Switching on the appliance

1.

Turn the operating mode selector until the desired operating 

mode is selected.

2.

Turn the temperature selector until the desired temperature is 

selected.

The 

r

 indicator lamp lights up while the appliance is heating 

up and during any subsequent heating.

Accessories

Order no.

Grill set

Z1240X2

Glass pan

Z1262X0

Roasting pan, enamelled

Z1272X0

Baking tray, aluminium

Z1332X0

Baking tray, enamelled

Z1342X0

Baking tray, non-stick

Z1343X0

Baking and roasting shelf, close meshed

Z1453X0

Roasting tray, enamelled, two-piece

Z1512X0

CLOU 1x telescopic railing retrofit kit

Z1701X1

CLOU 3x telescopic railings retrofit kit

Z1742X1

CLOU 4x telescopic railings retrofit kit

Z1752X1

Tilt protection retrofit kit, pull-out stop

Z9110X0

Universal roasting dish, enamelled

Z9930X0

Accessories

Order no.