NEFF B45M42NOGB, Instruction Manual

7

Once the cooking time has elapsed, the appliance switches off 

automatically.

1.

Turn the operating mode and temperature selector back to 

the

Û

 position.

2.

Press the

KJ

 clock function button to exit the clock function.

End of operation

Automatic switch-off at a set time.

1.

Set the operating mode and temperature.
The appliance heats up.

2.

Press the

KJ

clock function button repeatedly until the

KJ

and

y

 symbols light up.

3.

Set the end of operation using the rotary selector 

(e.g.

‚ƒ

:

„‹

o'clock).

The setting is applied automatically. The clock is then 

displayed again.

The appliance switches off automatically at the time set for the 

end of operation.

1.

Turn the operating mode and temperature selector back to 

the

Û

 position.

2.

Press the

KJ

 clock function button to exit the clock function.

Preset operation

The appliance switches on automatically, then switches off 

automatically at the time preselected for the end of operation. 

To set this function, combine the cooking time and end of 

operation clock functions. 
Bear in mind that food which spoils easily should not be left in 

the cooking compartment for too long.

1.

Set the operating mode and temperature.
The appliance heats up.

2.

Press the

KJ

clock function button repeatedly until 

the

KJ

and

x

 symbols light up.

3.

Set the cooking time with the rotary selector 

(e.g.

‚

:

„‹

hours).

The setting is applied automatically.

4.

Press the

KJ

clock function button repeatedly until 

the

KJ

and

y

 symbols light up.

5.

Set the end of operation using the rotary selector 

(e.g.

‚ƒ

:

„‹

o'clock).

The appliance switches off and waits until the appropriate 

time to switch on (

‚‚

:

‹‹

in the example). The appliance 

switches off automatically at the time set for the end of 

operation (

‚ƒ

:

„‹

).

6.

Turn the operating mode and temperature selector back to 

the

Û

 position.

7.

Press the

KJ

 clock function button to exit the clock function.

Setting the clock

You can only change the clock when no other clock function is 

active.

1.

Press the

KJ 

clock function button repeatedly until 

the

KJ

and

3

 symbols light up.

2.

Set the clock using the rotary selector.
The setting is applied automatically.

Checking, correcting or deleting settings

1.

To check your settings, press the

KJ

 clock function button 

repeatedly until the corresponding symbol lights up.

2.

If necessary, you can correct your setting using the rotary 

selector.

3.

If you wish to cancel your setting, turn the rotary selector anti-

clockwise to the original value.

Baking

In this section, you will find information on

■

Baking on one level

■

Baking on two or more levels

■

The baking table

■

The baking table for ready-made products

■

Tips and tricks for baking

Note: 

Do not use shelf height 2 when baking with

3

CircoTherm®. This will adversely affect air circulation and your 

baking results will not be as good.

We recommend that you use dark-coloured metal baking tins.
Tinplate and glass dishes increase the baking time required 

and the cake will not brown evenly.
Always slide the universal pan in carefully as far as it will go 

and make sure that the sloping edge is facing the appliance 

door.
Slide the flat wire racks in so that the rear upstand is at the rear. 

The baking tins therefore cannot slide off the back of the shelf.