10
Selecting favourites
All operating modes except:
■
CircoTherm
■
Top/bottom heat
■
Full-surface grill
■
Personal programmes menu
can be selected or deselected as favourites. The appliance
must be switched off.
1.
Touch the
²
button for 3 seconds in order to go to the Basic
settings menu.
2.
Scroll the NeffNavigator® in order to select the “Favourites”
submenu, and push down.
3.
Scroll the NeffNavigator® in order to select an operating
mode.
4.
Push the NeffNavigator® down in order to mark either “Yes”
or “No”.
If you have marked “No”, this operating mode no longer
appears in the selection.
5.
Touch the
²
button in order to exit the Basic settings menu.
Setting operation of the on/off function and the start/stop
function
You can operate the on/off function and the start/stop function
either via the buttons (
~
,
m
) or via the NeffNavigator®.
Operation via buttons
Operation via NeffNavigator®
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
The length of time after which your appliance switches itself off
depends on the settings that you make.
“Safety cut-out” appears in the text display. Appliance operation
is interrupted.
To deactivate, scroll the NeffNavigator® or touch a button.
Appliance operation is resumed.
Sub menu
Basic setting
Language
German
English
French
Spanish
Dutch
Italian
Russian
Greek
Polish
Lock (see:
Childproof lock)
Unlocking the appliance
Lock appliance
Locking the appliance permanently
Audible signal
Off
30 seconds
2 minutes
10 minutes
Display brightness Setting: 1 - 5
Display contrast
Setting: 1 - 5
Favourites
Selection of preferred operating modes
(see: Selecting favourites)
Operation
On/off + start/stop via Navigator (see:
Setting operation of the on/off function
and the start/stop function)
On/off + start/stop via buttons (factory
setting)
Start logo
Off
1 second
2 seconds
3 seconds
Rotation direction
Inverted
Normal
Function
On/off + start/stop via buttons
On/off
Button
~
Start/Stop
Button
m
Function
On/off + start/stop via Navigator
On, start/stop
Press NeffNavigator® for 1 second from
the front
Off
Press NeffNavigator® for 2 seconds from
the front
