NEFF B47VR32.0B, Instruction Manual

en

    Operating the appliance

14

1

Operating the appliance

Operating

 the appl

iance

You have already learnt about the controls and how 

they work. Now we will explain how to set your 

appliance. You will learn about what happens when you 

switch the appliance on and off, and how to select the 

operating mode.

Switching the appliance on and off

Touch the 

#

 touch button to switch the appliance on or 

off.
After switching off the appliance, on the display you can 

see if the residual heat in the cooking compartment is 

high or low.

Notes

■

Certain displays and notes, such as the residual heat 

in the cooking compartment, remain visible on the 

display even when the appliance is switched off.

■

After an appliance operation, the cooling fan runs on 

audibly until the cooking compartment has been 

cooled as far as possible.

■

Switch off your device when you do not need to use 

it. If no settings are applied for a long time, the 

appliance switches itself off automatically.

Setting and starting the appliance operation

Example: CircoTherm hot air 

‚

 at 170 °C

1.

Touch the 

#

 touch button to switch on the 

appliance.

You are taken directly to the 

¢

 menu for the types of 

heating.

2.

Use the 

(

 or 

)

 button to select the type of heating.

3.

Use the 

& 

 button to navigate to the next line.

4.

Use the 

(

 or 

)

 button to select the temperature.

Note: 

Depending on the operating mode, different 

settings are available. For each further setting, use 

the 

&

 button to navigate to the next line. Use the 

( 

or 

) 

 button to select the setting.

5.

Touch the 

#

 touch button to start the appliance 

operation.

The heating bar and run time appear on the display.

Note: 

If you would like to go directly to the 

0

 main 

menu after switching on the appliance, you can select 

the main menu under "Operation after switching on" in 

the basic settings chapter. 

~

 "Basic settings" 

on page 21

Default values

The appliance suggests a temperature or setting for 

each type of heating. You can accept this value or 

change it in the appropriate area.

Heating bar

As soon as a type of heating has started, the heating 

bar appears on the display.The heating bar shows the 

temperature increase in the cooking compartment.

Run time

When a type of heating has been started, the run time is 

displayed. The run time counts upwards during the 

operation. You can therefore check how long the 

operation has already been running.

Displaying the current temperature

To show the current temperature on the display, press 

the 

!

 touch button.

The current temperature is shown briefly only when 

heating up.

Further information

If the 

!

 touch button lights up, information can be 

displayed. Touch the 

!

 touch button to do this. The 

information is displayed for a few seconds.

Changing or cancelling the appliance 

operation

Changing the appliance operation

1.

Use the 

#

 button to stop the operation.

2.

Use the 

&

 or 

%

 button to navigate to the line for the 

setting that should be changed.

3.

Use the 

(

 or 

)

 button to change the setting.

4.

Use the 

#

 touch button to start the changed 

operation.

Display

Meaning

-H-

Residual heat high (above 120 °C)

-h-

Residual heat low (between 60 °C and 120 °C)

&LUFR7KHUPKRWDLU

ƒ&

&LUFR7KHUPKRWDLU

ƒ&