NEFF B47VR32.0B, Instruction Manual

en

    Cleaning agent

24

--------

Notes

■

Slight differences in colour on the front of the 

appliance are caused by the use of different 

materials, such as glass, plastic and metal.

■

Shadows on the door panels, which look like 

streaks, are caused by reflections made by the 

interior lighting.

■

Enamel is baked on at very high temperatures.This 

can cause some slight colour variation. This is 

normal and does not affect operation.

The edges of thin trays cannot be completely 

enamelled. As a result, these edges can be rough. 

This does not impair the anti-corrosion protection.

Surfaces in the cooking compartment

The back wall, ceiling and side parts in the cooking 

compartment are self-cleaning. You can tell this from 

the rough surface.
The cooking compartment floor is enamelled and has 

smooth surfaces.

Cleaning enamel surfaces

Clean the smooth enamel surfaces with a dish cloth 

and hot soapy water or a vinegar solution. Then dry with 

a soft cloth.
Soften baked-on food residues with a damp cloth and 

soapy water. If there are heavy deposits of dirt, use a 

stainless steel scouring pad or oven cleaner.
Leave the cooking compartment open to dry after 

cleaning.

Tip: 

It is best to use the cleaning aid. 

~

 "Cleaning 

function" on page 25

Cleaning self-cleaning surfaces

The self-cleaning surfaces are coated with a porous, 

matte ceramic layer. This coating absorbs and dispels 

splashes from baking and roasting while the appliance 

is in operation.
If the self-cleaning surfaces no longer clean themselves 

sufficiently and dark stains appear, they can be cleaned 

using the cleaning function. To do this, refer to the 

information in the relevant section. 

~

 "Cleaning 

function" on page 25

Caution!

Do not use oven cleaner on self-cleaning surfaces. This 

will damage the surfaces. If oven cleaner does get onto 

these surfaces, dab it off immediately using water and a 

sponge cloth. Do not rub the surface and do not use 

abrasive cleaning aids. 

Keeping the appliance clean

Always keep the appliance clean and remove dirt 

immediately so that stubborn deposits of dirt do not 

build up.

Tips

■

Clean the cooking compartment after each use. This 

will ensure that dirt cannot be baked on.

■

Always remove flecks of limescale, grease, starch 

and albumin (e.g. egg white) immediately.

■

Use the universal pan for baking very moist cakes.

■

Use suitable ovenware for roasting, e.g. a roasting 

dish.

■

Where possible, use Circotherm hot air. This type of 

heating creates less dirt.

Door panels

Hot soapy water: 

Clean with a dish cloth and then dry with a soft 

cloth.
Do not use a glass scraper or a stainless steel 

scouring pad.

Door handle

Hot soapy water: 

Clean with a dish cloth and then dry with a soft 

cloth.
If descaler comes into contact with the door han-

dle, wipe it off immediately. Otherwise, any stains 

will not be able to be removed.

Appliance exterior

Enamel surfaces 

and self-cleaning 

surfaces

Observe the instructions for the surfaces of the 

cooking compartment that follow the table.

Glass cover for 

the interior light-

ing

Hot soapy water: 

Clean with a dish cloth and then dry with a soft 

cloth.
If the cooking compartment is heavily soiled, use 

oven cleaner.

Door seal
Do not remove.

Hot soapy water: 

Clean with a dish cloth.
Do not scour.

Stainless steel 

door cover

Stainless steel cleaner: 

Observe the manufacturer's instructions.
Do not use stainless steel care products.
Remove the door cover for cleaning.

Rails

Hot soapy water: 

Soak and clean with a dish cloth or brush.

Pull-out system

Hot soapy water: 

Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails 

are pulled out – it is best to clean them when they 

are pushed in. Do not clean in the dishwasher.

Accessories

Hot soapy water: 

Soak and clean with a dish cloth or brush.
If there are heavy deposits of dirt, use a stainless 

steel scouring pad.

Water tank

Hot soapy water: 

Clean with a dish cloth and rinse thoroughly to 

remove residual detergent.
Then dry with a soft cloth. Leave the water tank to 

dry with the lid open. Rub the seal on the lid until 

dry.
Do not clean in the dishwasher.