NEFF B47VR32.0B, Instruction Manual

en

    Rails

26

Finishing

As soon as the cleaning aid has finished, an audible 

signal sounds and the appliance ends the operation 

automatically. 
As soon as you open the appliance door, the interior 

lighting is switched on so that you can finish cleaning 

the cooking compartment more easily. The remaining 

water in the cooking compartment must be removed 

promptly. Do not leave the remaining water in the 

cooking compartment for a long time (e.g. overnight). 

The appliance must not be operated when the cooking 

compartment is still wet or damp.

Final cleaning

1.

Open the appliance door and remove the remaining 

water with an absorbent sponge cloth.

2.

Clean the smooth surfaces in the cooking 

compartment with a dish cloth or a soft brush. 

Stubborn residues can be removed using a stainless 

steel scouring pad.

3.

Remove limescale with a cloth soaked in vinegar. 

Then wipe with clean water and rub dry with a soft 

cloth (including under the door seal).

4.

Use the 

#

 touch button to switch off the appliance.

5.

Leave the appliance door ajar in the locking position 

(approx. 30°) for approx. 1 hour to allow the enamel 

surfaces in the cooking compartment to dry. 

Alternatively, you can also run the rapid drying 

function for the cooking compartment.

Running the rapid drying function for the cooking 

compartment

1.

After the cleaning aid process has finished, leave the 

appliance door ajar in the locking position (approx. 

30°).

2.

Touch the 

#

 touch button.

3.

Start CircoTherm hot air at 50 °C.

4.

After 5 minutes, switch off the appliance and close 

the appliance door.

Removing heavy deposits of dirt

You have several options for removing particularly 

stubborn deposits of dirt.

■

Leave the soapy water to work for some time before 

starting the cleaning aid.

■

Rub soapy water onto the dirt on the smooth 

surfaces before starting the cleaning aid.

■

Repeat the cleaning aid once the cooking 

compartment has cooled down.

p

Rails

Rails

With good care and cleaning, your appliance will retain 

its appearance and remain fully functional for a long 

time to come. This will tell you how to remove the 

shelves and clean them.

Detaching and refitting the rails

:

Warning

Risk of burns!

The rails become very hot. Never touch the hot rails. 

Always allow the appliance to cool down. Keep children 

away from the appliance.

Detaching the rails

1.

Lift the rail slightly at the front 

‚

 and detach it 

ƒ

(figure 

!

).

2.

Then pull the whole rail towards you and take it out 

(figure 

"

).

Clean the rails with cleaning agent and a sponge. For 

stubborn deposits of dirt, use a brush.

Attaching the rails

The rails only fit on the right or the left side. For both 

rails, ensure that the retaining bracket is at the front.

1.

First, insert the rail in the middle of the rear socket 

‚

, 

until the rail rests against the cooking compartment 

wall, and push it back 

ƒ

 (figure 

!

).

2.

Then insert the rail into the front socket 

„

, until the 

rail also rests against the cooking compartment wall 

here, and press it downwards 

…

 (figure 

"

).

2

D

E

1

2

F

G

1

D

E