en
Accessories
12
Changing the shelf position for the
telescopic rail
Bars and telescopic rails can be positioned in any
order. For example, you can fit the telescopic rail to the
shelf position which you use the most frequently.
Removing the bar
Telescopic rails are removed and fitted like bars.
1.
Push the bar towards the back
‚
until it can be
pulled out upwards
ƒ
(Fig.
!
).
2.
Unhook the bar at the back and remove it (Fig.
"
).
Fitting the bar
1.
Fit the bar at the back (Fig.
!
).
2.
Push the bar towards the back
‚
and down
ƒ
onto
the pin
„
(Fig.
"
).
3.
Ensure that the hook is hooked onto the pin
„
(Fig.
#
).
Combining accessories
You can insert the wire rack and the universal pan at
the same time to catch drops of liquid.
When inserting the wire rack, ensure that both spacers
‚
are at the rear edge. When the universal pan is
inserted, the wire rack is on top of the upper guide rod
of the shelf position.
Small steam containers may only be placed in the
cooking compartment with the wire rack.
2
1
D
E
1
F
2
F
D
E
D
D
D
Summary of Contents for B48FT78 0B Series
Page 1: ...en INSTRUCTION MANUAL Combination steam oven B48FT78 0B...
Page 2: ......