NEFF B57CS24 0B Series, Instruction Manual

en

    Operating the appliance

14

4.

Use the 

(

 or 

)

 button to select the temperature.

Note: 

Depending on the operating mode, different 

settings are available. For each further setting, use 
the 

&

 button to navigate to the next line. Use the 

( 

or 

) 

 button to select the setting.

5.

Touch the 

#

 touch button to start the appliance 

operation.
The heating bar and run time appear on the display.

Note: 

If you would like to go directly to the 

0

 main 

menu after switching on the appliance, you can select 
the main menu under "Operation after switching on" in 
the basic settings chapter. 

Default values

The appliance suggests a temperature or setting for 
each type of heating. You can accept this value or 
change it in the appropriate area.

Heating bar

As soon as a type of heating has started, the heating 
bar appears on the display.The heating bar shows the 
temperature increase in the cooking compartment.

Run time

When a type of heating has been started, the run time is 
displayed. The run time counts upwards during the 
operation. You can therefore check how long the 
operation has already been running.

Displaying the current temperature

To show the current temperature on the display, press 
the 

!

 touch button.

The current temperature is shown briefly only when 
heating up.

Further information

If the 

!

 touch button lights up, information can be 

displayed. Touch the 

!

 touch button to do this. The 

information is displayed for a few seconds.

Changing or cancelling the appliance 
operation

Changing the appliance operation

1.

Use the 

#

 button to stop the operation.

2.

Use the 

&

 or 

%

 button to navigate to the line for the 

setting that should be changed.

3.

Use the 

(

 or 

)

 button to change the setting.

4.

Use the 

#

 touch button to start the changed 

operation.

Notes

■

The cooling fan may continue to run while an 
operation is interrupted.

■

After a temperature change, the paused running time 
continues to count. After a change in the type of 
heating, the running time starts again from zero.

Cancelling the appliance operation

Press and hold the 

#

 touch button until the appliance 

operation is cancelled.

Note: 

 Operating modes such as the cleaning function 

cannot be cancelled.

Heating up the appliance quickly

You can use the "Rapid heat-up" and "PowerBoost" 
functions to reduce the preheat time. Whether the 
appliance is preheated with the "Rapid heat-up" function 
or the "PowerBoost" function depends on the type of 
heating that has been set. With the "PowerBoost" 
function, unlike with the "Rapid heat-up" function, you 
can place your food into the cold cooking compartment 
even before preheating has begun. Only cook on one 
level when using the "PowerBoost" function.

Notes

■

If the 

°

 touch button is lit, the "Rapid heat-up" or 

"PowerBoost" function can be activated.

■

To deactivate the "Rapid heat-up" or "PowerBoost" 
function before it has finished, touch the 

°

 touch 

button.

Activating the "Rapid heat-up" function

1.

Set top/bottom heating 

ƒ

 and the temperature.

Note: 

Set a temperature above 100 °C to allow the 

appliance to preheat quickly. 

2.

Touch the 

#

 touch button to start the appliance 

operation.

3.

Touch the 

°

 touch button to activate the "Rapid 

heat-up" function.
The 

°

 symbol appears on the display.

4.

Once the set temperature has been reached, the 
"Rapid heat-up" function switches itself off 
automatically. The 

°

 symbol disappears from the 

display. Place the food in the cooking compartment

&LUFR7KHUPKRWDLU

ƒ&

Function

Type of heating

Place the food in 
the cooking 
compartment

Rapid heat-up

Top/bottom heating 

ƒ

after preheating

PowerBoost*

CircoTherm hot air 

‚

before preheating

Bread-baking setting 

…

* Do not use more than one level for cooking