NEFF B57CS24H0, Instruction Manual

Operating the appliance       

en

15

4.

Use the 

(

 or 

)

 button to select the temperature.

Note: 

Depending on the operating mode, different 

settings are available. For each further setting, use 

the 

&

 button to navigate to the next line. Use the 

( 

or 

) 

 button to select the setting.

5.

Touch the 

#

 touch button to start the appliance 

operation.

The heating bar and run time appear on the display.

Note: 

If you would like to go directly to the 

0

 main 

menu after switching on the appliance, you can select 

the main menu under "Operation after switching on" in 

the basic settings chapter. 

Default values

The appliance suggests a temperature or setting for 

each type of heating. You can accept this value or 

change it in the appropriate area.

Heating bar

As soon as a type of heating has started, the heating 

bar appears on the display.The heating bar shows the 

temperature increase in the cooking compartment.

Run time

When a type of heating has been started, the run time is 

displayed. The run time counts upwards during the 

operation. You can therefore check how long the 

operation has already been running.

Displaying the current temperature

To show the current temperature on the display, press 

the 

!

 touch button.

The current temperature is shown briefly only when 

heating up.

Further information

If the 

!

 touch button lights up, information can be 

displayed. Touch the 

!

 touch button to do this. The 

information is displayed for a few seconds.

Changing or cancelling the appliance 

operation

Changing the appliance operation

1.

Use the 

#

 button to stop the operation.

2.

Use the 

&

 or 

%

 button to navigate to the line for the 

setting that should be changed.

3.

Use the 

(

 or 

)

 button to change the setting.

4.

Use the 

#

 touch button to start the changed 

operation.

Notes

■

The cooling fan may continue to run while an 

operation is interrupted.

■

After a temperature change, the paused running time 

continues to count. After a change in the type of 

heating, the running time starts again from zero.

Cancelling the appliance operation

Press and hold the 

#

 touch button until the appliance 

operation is cancelled.

Note: 

 Operating modes such as the cleaning function 

cannot be cancelled.

Heating up the appliance quickly

You can use the "Rapid heat-up" and "PowerBoost" 

functions to reduce the preheat time. Whether the 

appliance is preheated with the "Rapid heat-up" function 

or the "PowerBoost" function depends on the type of 

heating that has been set. With the "PowerBoost" 

function, unlike with the "Rapid heat-up" function, you 

can place your food into the cold cooking compartment 

even before preheating has begun. Only cook on one 

level when using the "PowerBoost" function.

Notes

■

If the 

°

 touch button is lit, the "Rapid heat-up" or 

"PowerBoost" function can be activated.

■

To deactivate the "Rapid heat-up" or "PowerBoost" 

function before it has finished, touch the 

°

 touch 

button.

Activating the "Rapid heat-up" function

1.

Set top/bottom heating 

ƒ

 and the temperature.

Note: 

Set a temperature above 100 °C to allow the 

appliance to preheat quickly. 

2.

Touch the 

#

 touch button to start the appliance 

operation.

3.

Touch the 

°

 touch button to activate the "Rapid 

heat-up" function.

The 

°

 symbol appears on the display.

4.

Once the set temperature has been reached, the 

"Rapid heat-up" function switches itself off 

automatically. The 

°

 symbol disappears from the 

display. Place the food in the cooking compartment

ƒ&

&LUFR7KHUP

Function

Type of heating

Place the food in 

the cooking 

compartment

Rapid heat-up

Top/bottom heating 

ƒ

after preheating

PowerBoost*

CircoTherm hot air 

‚

before preheating

Bread-baking setting 

…

* Do not use more than one level for cooking