Childproof lock
en
15
12 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
12.1 Activating the childproof lock
The childproof lock disables the control panel to pre-
vent children from accidentally switching on the appli-
ance. To switch on the appliance, deactivate the child-
proof lock.
Note:
When you activate the childproof lock, the appli-
ance will immediately disable the control panel. The
button is the exception and will not be disabled.
1.
Press .
2.
Press .
a
"Childproof lock activated" appears on the display.
12.2 Deactivating the childproof lock
▶
Press and hold "Unlock" until "Childproof lock deac-
tivated" appears.
13 Rapid heating
With the rapid heating function, you can shorten the
heat-up time.
From 200 °C, the rapid heating function is activated
automatically.
Note:
You can deactivate automatic rapid heating from
200 °C in the basic settings.
Rapid heating is possible for the following types of
heating:
¡
"Circo Therm hot air"
¡
"Top/bottom heat"
¡
"Bread baking setting"
13.1 Activating the "Rapid heat-up" function
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:
Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
Rapid heating automatically switches off at temper-
atures of 200 °C and above.
2.
Press .
3.
Press to start the operation.
a
Once rapid heating has ended, "Rapid heating"
switches off automatically and a signal sounds.
goes out on the display.
4.
Place the food in the cooking compartment.
13.2 Deactivating the "Rapid heat-up"
function
1.
Press .
2.
Press .
14 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
You can find more information about the individual ba-
sic settings on the display using "Information".
Basic settings Selection
Language
See selection on the appliance
Home Connect Connect the oven to a mobile end
device and remotely control it
Time
Time in 24-hour format
Date
Date in the format DD.MM.YYYY
Display
Selection
Brightness
¡
1
¡
2
¡
3
¡
4
¡
5
1
Standby
screen
¡
On for a limited time
¡
On (this setting increases energy
consumption)
¡
Off
1
Clock
¡
D date
1
¡
Digital
¡
An date
¡
Analogue
Adjustment
Align the display horizontally and ver-
tically
1
Factory setting (may vary according to model)
Summary of Contents for B59CR3A 0 Series
Page 1: ...Oven User manual and installation instructions B59CR3A 0...
Page 42: ......
Page 43: ......
