en
Time-setting options
12
8.5 Changing the temperature
You can also change the temperature or level once you
have started the appliance.
1.
Press "Temperature".
2.
Use or to change the temperature.
3.
Press
to confirm the setting.
a
The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appli-
ance will reset all the settings.
1.
Press to pause operation.
2.
Press to switch to the types of heating.
3.
Scroll through the types of heating using or .
4.
Press the type of heating that you want to use.
5.
Adjust the temperature or level, if required.
6.
Press to start the operation.
8.7 Pausing operation
1.
Press .
2.
Press again to resume operation.
8.8 Displaying information
Note:
In most cases, you can call up information about
the function that you have just started.
1.
Press "Information".
a
The information will be displayed for a few seconds.
2.
Press to close the information.
8.9 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note:
If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
1.
Change the "Lighting" basic setting to "Always off".
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Set the required type of heating.
"Setting the type of heating and temperature",
3.
Set the required cooking time depending on the
type of heating.
4.
Use "Ready at" to set the time at which the opera-
tion should end.
"Delayed start/"Ready at" time", Page 13
5.
Place the food in the cooking compartment before
the appliance starts to heat.
6.
Press to start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note:
If necessary, change the basic setting for the
lighting again.
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
Time-setting
option
Use
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. The timer does not affect the
appliance.
Cooking
time
Once the set duration has elapsed,
the appliance stops heating automat-
ically.
Ready at
Along with the duration, you can set
the time at which you want the oper-
ation to end. The appliance starts up
automatically so that the operation
finishes at the required time.
9.1 Timer
You can set the timer regardless of whether the appli-
ance is on or off.
Setting the timer
1.
Press .
2.
Press .
3.
Press Hours, Minutes or Seconds.
4.
Use or to select the timer duration.
5.
Press to confirm the setting.
a
appears on the display. The timer counts down.
a
Once the timer duration has elapsed, an audible sig-
nal sounds.
6.
Press any button to end the audible signal.
Changing the timer
1.
Press .
2.
Press .
3.
Press .
4.
Press Hours, Minutes or Seconds.
5.
Use or to change the timer duration.
6.
Press to confirm the setting.
Cancelling the timer
1.
Press .
2.
Press .
3.
Press to reset the timer duration.
4.
Press to close the timer.
