en
Operating the appliance
12
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
uncarbonated mineral water.
Fill the water tank before each use:
1.
Open the appliance door.
2.
Remove the water tank from the water tank recess
(picture
!
).
3.
Fill the water tank with cold water up to the "max."
mark. (Picture
"
).
4.
Close the tank cover
until you feel it engage.
5.
Insert the filled water tank (picture
#
).
6.
Check whether the water tank is pushed in flush with
the water tank recess (picture
$
).
7.
Close the appliance
door.
The water tank has been filled. You can now start the
operation.
Refilling the water tank
If the water tank is empty, the prompt to fill the water
tank appears on the display. The operation is stopped.
:
Warning – Risk of scalding!
When you open the appliance door, hot water may flow
out of the appliance. When opening the door, do not
stand too close to the appliance. Open the appliance
door carefully. Keep children away from the appliance.
If the evaporator dish overflows, do not pour more water
into the water tank.
1.
Carefully open the appliance door.
2.
Remove the water tank and fill it.
3.
Slide the water tank back in and close the appliance
door.
4.
Start the operation.
The operation continues.
Setting and starting the appliance operation
Example: 15 minutes steaming
‹
at 90 °C
1.
Touch the
#
touch button to switch on the
appliance.
This takes you directly to the steaming
‹
menu.
2.
Use the
(
or
)
button to select the heating function.
3.
Use the
&
button to navigate to the next line.
4.
Use the
(
or
)
button to select the temperature.
5.
Use the
&
button to navigate to the next line.
6.
Press the
(
or
)
button to change the cooking time.
This takes you to the time-setting options menu.
7.
Use the
(
or
)
button to select the cooking time.
8.
Use the
0
button to exit the time-setting options
menu.
9.
Touch the
#
touch button.
The appliance starts.
“Fill water tank?” message
This message appears if you set a type of heating and
the water tank is only half full.
If you think that the water in the water tank is sufficient
for the cooking procedure, you can start the appliance.
If not, fill the water tank to the "max" mark, slide it back
in and start the appliance.
2
1
6WHDPLQJ
&
PLQ_V
6WHDPLQJ
&
PLQ_V
PLQ_V
PLQ_V
Summary of Contents for C15DR02 0 Series
Page 1: ...en INSTRUCTION MANUAL STEAM OVEN C15DR02 0...
Page 2: ......
