Troubleshooting
en
21
6.
Tilt the condensate trough upwards and remove it.
7.
Clean the door panels with glass cleaner and a soft
cloth. Clean the condensate trough with a cloth and
hot soapy water.
Refitting the door panels
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
Note:
You cannot use your appliance again until the
panels have been correctly fitted.
1.
Open the appliance door fully.
2.
Refit the condensation trough. To do this, insert the
condensate trough from above and rotate it down-
wards .
3.
Slide in the inner panel .
When doing this, ensure that the glossy side of the
panel is on the outside and the cut-outs on the left
and right are at the top.
The panel must be sitting correctly at the bottom in
the retainer.
4.
Push the inner panel in at the top .
5.
Put the cover back in place and press on it until you
hear it click into place .
6.
Open the appliance door fully.
7.
Close the two locking levers on the left and right .
8.
Close the appliance door.
13 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
Summary of Contents for C17DR00.0
Page 1: ...Steamer en User manual and installation instructions C17DR00 0 ...
Page 42: ......
Page 43: ......