9
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1.
Turn the operating mode selector until the desired operating
mode appears on the text display.
A default temperature appears on the temperature display.
2.
Turn the temperature selector to change the default
temperature.
The appliance begins heating.
Notes
■
The
/
Low-temperature cooking,
é
Steam cooking and
ê
Dough proving cooking operating modes can only be started
if neither
•
nor
œ
is displayed on the temperature display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the
±
info button. The current temperature appears for
3 seconds.
Note:
The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the
Û
position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
1.
Press and hold the
±
info button for 3 seconds to go to the
basic settings menu.
The text display shows "Select language: German". If the
appliance controls are locked, you must unlock them first.
2.
Press the
±
info button repeatedly until the current basic
setting for the relevant submenu is displayed on the text
display (e.g. "Audible signal off").
3.
Using the temperature selector, set the required basic setting
within a submenu (e.g. "Audible signal 2 minutes").
4.
Press and hold the
±
info button for 3 seconds.
Your basic setting is saved.
Operating mode
Default temper-
ature in °C
Temperature
range in °C
CircoTherm®
3
160
40 - 200
A
Defrost
Fixed setting
%
Top/bottom heat
170
50 - 275
0
CircoTherm intensive
220
50 - 275
ë
Bread-baking
200
180 - 220
$
Bottom heat
200
50 - 225
4
Circo-roasting
170
50 - 250
+
Full-surface grill
+
Full-surface grill (inten-
sive)*
220
50 - 275
Fixed setting
(
Centre-area grill
(
Centre-area grill (inten-
sive)*
180
50 - 275
Fixed setting
/
Low-temperature cooking Fixed setting
é
Steam cooking
Fixed setting
ê
Dough proving
Fixed setting
z
Oven cleaning
Fixed setting
\
Interior lighting
Fixed setting
* Turn the temperature selector beyond 275 °C.
‚Ÿ£
appears
in the temperature display
&LUFR7KHUP
Temperature
display
Text display
Meaning
•
Residual heat
high
Residual heat high
(above 120 °C)
œ
Residual heat
low
Residual heat low
(between 60 °C and 120 °C)
$
%
Summary of Contents for C17E54.3GB
