Appliance door
en
27
q
Appliance door
Appliance
door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing the door cover
The stainless-steel inlay in the door cover may become
discoloured. To carry out thorough cleaning, you can
remove the cover.
1.
Open the appliance door slightly.
2.
Press on the right and left side of the cover (fig.
!
).
3.
Remove the cover (fig.
"
).
Close the appliance door carefully
Note:
Clean the stainless-steel inlay in the cover with
a stainless-steel cleaning agent. Clean the rest of the
door cover with soapy water and a soft cloth.
4.
Open the appliance door again slightly. Put the
cover back in place and press on it until it clicks
audibly into place (fig.
#
).
5.
Close the appliance door.
Removing and fitting the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing the door panels from the appliance
1.
Open the appliance door slightly.
2.
Press on the right and left side of the cover (fig.
!
).
3.
Remove the cover (fig.
"
).
4.
Undo and remove the screws on the left and right of
the appliance door (fig.
#
).
5.
Before closing the door again, trap a tea towel that
has been folded several times in the door (fig.
$
).
Pull out the front panel upwards and lay it on a flat
surface with the door handle facing downwards.
6.
Push both retainers at the top of the intermediate
panel upwards, but do not remove them (fig.
%
).
Hold the panel with one hand. Take out the panel.
Clean the panels with glass cleaner and a soft cloth.
:
Warning
Risk of serious damage to health!
If the screws are loosened, the safety of the appliance
can no longer be guaranteed. Microwave energy may
escape. Never loosen the screws.
Do not unscrew the four black screws (fig.
&
).
2
1
2
1
