en
Meat thermometer
20
@
Meat thermometer
Meat ther
mometer
The MultiPoint meat thermometer makes precise
cooking possible. It measures the temperature inside
the food. Once the set temperature has been reached,
the appliance automatically switches itself off.
Suitable types of heating
Notes
■
The meat thermometer measures the temperature
on the inside of the food between 30 °C and 99 °C.
■
Use only the meat thermometer supplied. You can
purchase it as a spare part from the after-sales
service.
■
After use, always remove the meat thermometer
from the cooking compartment. Never store it inside
the cooking compartment.
Inserting the meat probe into the food
Before placing your food into the cooking compartment,
insert the meat probe into the food.
The meat probe has three measuring points. Ensure
that the middle measuring point is inserted in the food.
Caution!
When you turn the microwave on, the tip of the meat
probe must be inserted in the food.
Meat:
For large pieces of meat, insert the meat probe at
an angle from above as far as it will go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
Poultry:
Insert the meat probe as far as it will go into
the thickest point in the breast. Insert the meat probe
into the poultry crossways or lengthways depending on
its structure. Then turn the poultry and place it on the
wire rack breast-side down.
Turning the food:
If you wish to turn the food, do not
remove the meat probe. Once you have turned the
food, check that the meat probe is correctly positioned
in the food.
If you remove the meat probe while the food is cooking,
all settings will be reset and you will have to apply them
again.
Caution!
Ensure that the meat probe's cable does not become
trapped.
To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few
centimetres between the grill element and the meat
probe. The meat may expand during the cooking
process.
Setting and starting the appliance operation
:
Warning
Risk of burns!
The cooking interior and the core temperature probe
become very hot. Use oven mitts to plug and unplug the
core temperature probe.
:
Warning
Risk of electric shock!
The insulation of an incompatible meat probe may be
damaged. Only use the meat probe which is
recommended for this appliance.
Notes
■
The set cooking compartment temperature must be
at least 10 °C higher than the core temperature.
■
To prevent the meat thermometer from being
damaged, the cooking compartment temperature
must not be set higher than 250 °C.
1.
Insert the meat thermometer in the socket on the left-
hand side of the cooking compartment.
2.
Close the appliance door.
Caution!
When doing so, ensure that the meat thermometer's
cable is not trapped in the appliance door. It may be
damaged.
3.
Touch the
#
touch button.
4.
Set the type of heating and cooking compartment
temperature.
Note:
When the meat thermometer is plugged into
the socket, you can only select a type of heating with
which the meat thermometer can be used.
5.
Use the
&
button to navigate to the next line.
6.
Set the core temperature using the
(
or
)
button.
‚
Hot air
Microwave
ƒ
Top/bottom heating
Microwave
‡
Circo-roasting
Microwave
„
Pizza setting
‘
Top/bottom heating eco
ž
Hot air eco
