Basic settings
en
13
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Changing basic settings
1.
Press .
2.
Press .
3.
Use or to select "Settings" .
4.
Use to navigate to the next line.
5.
Use or to select the setting.
6.
If required, use to navigate to the next line.
7.
Use or to select the setting.
8.
Press .
9.
Select "Save" to save the setting.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
11.2 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡
Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡
Your changes to the basic settings will be retained
even after a power failure. Only the settings pertain-
ing to the initial start-up of the appliance need to be
implemented once again following a power failure.
→
Basic settings Selection
Language
Set "Language"
Time
Set "Time "
Date
Set "Date"
1
Factory setting (may vary according to model)
Basic settings Selection
Audible signal
Short cooking time
Medium cooking time
1
Long cooking time
Button tone
Switched off
1
Switched on
Display bright-
ness
The display brightness can be adjus-
ted in 5 settings
Setting 3
1
Clock display
D date
Digital
Off
1
Night-time dim-
ming
Switched off
1
Switched on (display dimmed
between 10 p.m. and 6 a.m.)
Demo mode
Switched off
1
Switched on (this is only displayed in
the first 3 minutes following a reset
or the initial start-up)
Factory set-
tings
Reset
Do not reset
1
1
Factory setting (may vary according to model)
Note:
Changes to the language, button tone and dis-
play brightness settings take effect immediately. All
other settings do not take effect until you save them.
11.3 Changing the time
1.
Press .
2.
Press .
3.
Use or to select "Settings" .
4.
Use to navigate to the next line.
5.
Use or to select "Time ".
6.
If required, use to navigate to the next line.
7.
Use or to change the "Time ".
8.
Press .
9.
Select "Save" to save the setting.
12 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
12.1 Cleaning products
Only use suitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
▶
Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
You can find out which cleaning products are suitable
for each surface or part of the appliance in the indi-
vidual cleaning instructions.
Summary of Contents for C17UR02.0B
Page 1: ...Microwave Oven en User manual and installation instructions C17UR02 0B ...
Page 25: ......
Page 26: ......
Page 27: ......
