NEFF C27MS22.0B, Instruction Manual

 Childproof lock  

en

17

Setting the cooking time

Once the set cooking time has elapsed, the appliance 

switches off automatically. The function can only be 

used in combination with a type of heating.

1.

Touch the 

#

 touch button.

2.

Set the type of heating and temperature.

3.

Touch the 

0

 touch button.

The time-setting options are shown in the display.

4.

Use the 

(

 or 

)

 button to set the cooking time.

– Default value for the 

(

 button = 10 minutes

– Default value for the 

)

 button = 30 minutes

5.

Touch the 

#

 touch button to start the set cooking 

time.

As soon as the cooking time has elapsed, an audible 

signal sounds and the appliance ends the operation 

automatically. Touch the 

0

 touch button to end the 

audible signal.

Start delay – "Ready at"

The appliance switches on automatically and switches 

off at the preset end time.To do this, set the cooking 

time and determine the end time for the operation.
The start delay can only be used in combination with a 

type of heating.

Notes

■

Ensure that food is not left in the cooking 

compartment for too long as it may spoil.

■

It is not possible to start every type of heating with a 

start delay.

1.

Slide food into the cooking compartment on a 

suitable accessory and close the appliance door.

2.

Touch the 

#

 touch button.

3.

Set the type of heating and temperature.

4.

Touch the 

0

 touch button.

The time-setting options are shown on the display.

5.

Select the cooking time using the 

)

 button.

6.

Use the 

&

 button to navigate to the "

*

 Ready at" 

line.

7.

Select the end time using the 

)

 button.

8.

Touch the 

#

 touch button.

The appliance waits until the appropriate time to start 

the operation.

As soon as the end time has passed, a signal sounds 

and the appliance stops the operation automatically. To 

cancel the signal tone, touch the 

0

 touch button.

Checking, changing or deleting settings

1.

Touch the 

0

 touch button.

The time-setting options are shown on the display.

2.

Use the 

&

 or 

%

 button to navigate through the 

lines.

3.

If necessary, change the setting using the 

(

 or 

)

button. Set "00:00" to delete a time function.

The setting is applied automatically.

A

Childproof lock

Childproo

f lock

Your appliance is equipped with a childproof lock so 

that children cannot switch it on accidentally or change 

any settings.
Your appliance has two different locks. 

Note: 

As soon as you activate the childproof lock, the 

control panel is locked. The 

0

 and 

#

 touch buttons 

are not included.You can deactivate the childproof lock 

at any time.

Automatic childproof lock

The control panel is locked so that the appliance cannot 

be switched on. To switch it on, the automatic 

childproof lock must be interrupted. After the appliance 

operation, the control panel is locked automatically.

Activating

1.

Touch the 

±

 touch button.

2.

Touch the 

0

 touch button.

3.

Use the 

( 

 or 

)

 button to select "MyProfile".

4.

Use the 

&

 button to navigate to the next line.

5.

Use the 

( 

 or 

)

 button to select "Automatic childproof 

lock".

6.

Use the 

&

 button to navigate to the bottom line.

7.

Use the 

)

 button to select "Activated".

8.

Touch the 

0

 touch button.

9.

Use the 

&

 button to navigate to the next line to save 

the setting.

The "Automatic childproof lock" is activated. The 

1

 symbol appears on the display after switching off 

the appliance.

Cancelling

1.

Press and hold the 

0

 touch button until "Childproof 

lock deactivated" appears on the display.

2.

Touch the 

±

 touch button.

3.

Switch on the required appliance operation.

Deactivating

1.

Press and hold the 

0

 touch button until "Childproof 

lock deactivated" appears on the display.

2.

Touch the 

±

 touch button.

3.

Touch the 

0

 touch button.

4.

Use the 

( 

 or 

)

 button to select "MyProfile".

5.

Use the 

&

 button to navigate to the next line.

6.

Use the 

( 

 or 

)

 button to select "Automatic childproof 

lock".

7.

Use the 

&

 button to navigate to the bottom line.

8.

Use the 

(

 button to select "Deactivated".

9.

Touch the 

0

 touch button.

10.

Use the 

&

 button to navigate to the next line to save 

the setting.

The "Automatic childproof lock" is deactivated. 

11.

Touch the 

±

 touch button.

Lock

Activate/deactivate

Automatic childproof lock

Via the MyProfile menu 

~

 "Basic 

settings" on page 18

One-time childproof lock

Via the 

0 

 touch button