NEFF C27MS22.0B, Instruction Manual

en

    Microwave

20

Microwave output settings

You can set five different output settings for your 

microwave.

Setting the microwave

To achieve optimum results with the microwave, always 

insert the wire rack at shelf position 1.

1.

Touch the 

#

 touch button to switch on the 

appliance.

2.

Touch the 

0

 touch button.

The main menu appears.

3.

Use the 

(

 or 

)

 button to select "Microwave 

•

".

4.

Use the 

&

 button to open the microwave menu.

A microwave output setting and cooking time are 

suggested.

5.

Use the 

(

 or 

)

 button to set the required microwave 

output setting.

6.

Use the 

&

 button to navigate to the next line.

7.

Use the 

(

 or 

)

 button to set the required cooking 

time.

8.

Touch the 

#

 touch button to start the appliance 

operation.

The 

#

 touch button lights up red. The cooking time 

counts down on the display.

Changing the cooking time

You can change the cooking time at any time during 

operation by touching the 

(

 or 

)

 touch button.

Changing the microwave output setting

1.

Touch the 

#

 touch button and reset the microwave 

output setting and cooking time.

2.

Touch the 

#

 touch button to start the appliance 

operation.

The cooking time has elapsed

As soon as the end time has been reached, an audible 

signal sounds and the appliance ends the microwave 

operation automatically. 

"

x

 Finished" appears on the display. 

Touch the 

0

 touch button to stop the audible signal.

If you want to set a new cooking time, touch the 

#

touch button.
Otherwise, touch the 

#

 touch button to switch off the 

appliance.

Pausing the operation

Touch the 

#

 touch button to pause the oven. Press the 

#

 touch button again to continue the operation.

Opening the appliance door interrupts the operation. 

Touch the 

#

 touch button once the door has been 

closed. The operation continues.

Cancelling the operation

Touch the 

#

 touch button.

Starting drying

During drying, the cooking compartment is heated up 

so that the moisture in the cooking compartment 

evaporates. Then open the appliance door so that the 

steam escapes.

Caution!

Enamel damage: Do not start any operations when 

there is water on the cooking compartment floor. Before 

operation, wipe away the water from the cooking 

compartment floor.

1.

Leave the appliance to cool down.

2.

Remove the worst dirt from the cooking 

compartment immediately and wipe away moisture 

from the cooking compartment floor.

3.

If necessary, touch the 

#

 touch button to switch the 

appliance on.

4.

Touch the 

0

 touch button to display the operating 

modes.

5.

Use the 

( 

 or 

) 

 button to select "Drying 

ª

".

6.

Use the 

& 

 button to navigate to the next line.

The duration is displayed. It cannot be changed.

7.

Use the 

& 

 button to navigate to the next line.

8.

Touch the 

#

 touch button.

The drying function is started and is ended 

automatically after 10 minutes.

9.

Open the appliance door and leave it open for 1 to 2 

minutes so that the moisture in the cooking 

compartment can escape.

Setting the microwave to combi-mode

Several types of heating are suitable for combining with 

the microwave. The microwave output setting can be 

set to 90 W, 180 W or 360 W.
Types of heating available:

1.

Touch the 

#

 touch button to switch on the 

appliance.

2.

Touch the 

0

 touch button.

The main menu appears.

3.

Use the 

(

 or 

)

 button to select "Microwave 

combination operation 

¡

".

Output 

Food

Maximum cook-

ing time

90 W

For defrosting delicate foods

1 hr 30 mins

180 W

For defrosting and continued cooking 1 hr 30 mins

360 W

For cooking meat and for heating del-

icate foods

1 hr 30 mins

600 W

For heating and cooking food

1 hr 30 mins

1000 W

For heating liquids

30 mins

‚

Hot air

‚

Top/bottom heating 

‡

Circo-roasting 

ˆ

Grill, large area

‰

Grill, small area