en
Customer service
30
4
Customer service
Customer
service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please give the full product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
bearing these numbers can be found when you open
the appliance door.
To save time, you can make a note of the number of
your appliance and the telephone number of the after-
sales service in the space below, should it be required.
Please note that a visit from an after-sales service
engineer is not free of charge, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
n
Baking and roasting
assistant
Baking an
d roasti
ng assist
ant
The baking and roasting assistant helps you to prepare
meals with ease. The appliance applies the most
suitable settings.
To achieve good results, the cooking compartment
must not be too hot for the type of food you have
selected. If it is, a message will appear on the display.
Allow the cooking compartment to cool down and start
again.
Information on the settings
■
The cooking result depends on the quality of the
food and the type of cookware. For an optimal
cooking result, use food that is in good condition
and chilled meat only.
■
The baking and roasting assistant helps you to
prepare classic cakes, bread and roasts. The
appliance selects the optimal type of heating for you.
It suggests a suitable temperature and cooking time,
which you can change if you wish.
■
Information is provided, e.g. on cookware, shelf
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc. during
cooking. This is shown in the display shortly after
operation starts. An audible signal will remind you at
the right time.
■
Information on the right kind of cookware to use and
tips and tricks for preparation can be found at the
end of the instruction manual.
Selecting and setting food
You will be guided through the entire setting process for
your chosen food.
1.
Touch the
#
touch button to switch on the
appliance.
2.
Touch the
0
touch button.
3.
Use the
(
or
)
button to select the "Baking and
roasting assistant".
4.
Use the
&
button to navigate to the next line.
5.
Use the
(
or
)
button to select the required category.
6.
Use the
&
button to navigate to the next line.
7.
Use the
(
or
)
button to select the required meal.
8.
Use the
&
button to navigate to the next line.
The recommended settings appear on the display.
9.
You can change the recommended settings if you
wish. Touch the
&
button to do this.
Use the
&
or
%
button to navigate to the required
setting.
Use the
(
or
)
button to change the setting.
10.
Touch the
#
touch button to start the appliance
operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the
0
touch button to end the
audible signal.
E no.
FD no.
After-sales service
O
GB
0344 892 8989
Calls charged at local or mobile rate.
IE
01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
=1U
)'
(1U
7\SH
