NEFF D39DT68N0B, Instruction Manual

7

Cleaning and maintenance

: 

Risk of burns!

The appliance becomes hot during operation. Allow the 
appliance to cool down before cleaning.

: 

Risk of electric shock!

Penetrating moisture may result in an electric shock. Clean the 
appliance using a damp cloth only. Before cleaning, pull out the 
mains plug or switch off the circuit breaker in the fuse box.

: 

Risk of electric shock!

Do not use any high-pressure cleaners or steam cleaners, 
which can result in an electric shock.

: 

Risk of injury!

Components inside the appliance may have sharp edges. Wear 
protective gloves.

Cleaning agents

Observe the information in the table to ensure that the different 

surfaces are not damaged by using the wrong type of cleaning 

agent. Do not use

■

harsh or abrasive cleaning agents,

■

cleaning agents with a high concentration of alcohol,

■

hard scouring pads or sponges,

■

high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning 

agents.

Removing metal grease filter

1.

Fold the filter cover upwards.

Notes

■

The opening angle of the filter cover is limited to approx. 

80°. Do not open the filter cover any further to prevent any 

damage to the hinges.

■

The filter cover locks into any position.

2.

Remove the two metal grease filters under the filter cover. 
Fold the lock downwards, pull the metal filters forwards at the 

lock and take out the holder.

Note: 

Grease may accumulate in the bottom of the metal 

grease filter. Hold the metal grease filter level to prevent 

grease from dripping out.

3.

Remove the metal grease filters on the underside of the 

appliance.

4.

Clean the metal grease filter.

5.

After removing the filters, clean the inside of the appliance.

6.

Clean the filter cover.

Area

Cleaning agents

Stainless steel

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth.
Clean stainless steel surfaces in the 

direction of the grain only.
Special stainless steel cleaning prod-

ucts are available from our after-sales 

service or from specialist retailers. 

Apply a very thin layer of the cleaning 

product with a soft cloth.

Painted surfaces

Hot soapy water: 

Clean using a damp dish cloth and dry 

with a soft cloth/towel.
Do not use any stainless steel cleaners.

Aluminium and plas-

tic

Glass cleaner: 

Clean with a soft cloth.

Glass

Glass cleaner: 

Clean with a soft cloth. Do not use a 

glass scraper.

Operating controls

Hot soapy water: 

Clean using a damp dish cloth and dry 

with a soft cloth.
Risk of damage to the electronics from 

penetrating moisture. Never clean oper-

ator controls with a wet cloth.
Do not use any stainless steel cleaners.