NEFF D39DT68N0B, Instruction Manual

8

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is 

possible that individual features are described which do not 

apply to your appliance.

: 

Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months. 

Never operate the appliance without the grease filter.

Notes

■

Do not use any aggressive, acidic or alkaline cleaning 

agents.

■

When cleaning the metal mesh grease filters, also clean the 

holder for the metal mesh grease filters in the appliance 

using a damp cloth.

■

The metal mesh grease filters can be cleaned in the 

dishwasher or by hand.

By hand:
Note: 

You can use a special grease solvent for stubborn dirt. It 

can be ordered via the Online Shop.

■

Soak the metal mesh grease filters in a hot soapy solution. 

■

Clean the filters with a brush and then rinse them thoroughly.

■

Leave the metal mesh grease filters to drain.

In the dishwasher:
Note: 

If the metal mesh grease filters are cleaned in the 

dishwasher, slight discolouration may occur. This has no effect 

on the function of the metal mesh grease filters.

■

Do not clean heavily soiled metal mesh grease filters together 

with utensils.

■

Place the metal mesh grease filters loosely in the dishwasher. 

The metal mesh grease filters must not be wedged in.

Installing the metal mesh grease filter

1.

Insert the two metal grease filters under the filter cover with 

the lock facing downwards.
Fold the lock downwards and the metal grease filters inwards 

and lock them in place.

2.

Insert the metal grease filters on the underside of the 

appliance.

3.

Close the filter cover.

4.

Press and hold the 

7

 button for two seconds.

The saturation indicator is reset.

Changing the activated charcoal filter (only in 

circulating-air mode)

In order to guarantee efficient odour filtration, the filter must be 

serviced regularly.
The activated charcoal filters must be replaced at least every 

4 months.

Notes

■

The activated charcoal filters are not included in the delivery. 

The activated charcoal filters can be obtained from specialist 

retailers, from our after-sales service or from the Online Shop.

■

The activated charcoal filters cannot be cleaned or 

reactivated.

1.

Remove the metal grease filters.

2.

Turn the old activated charcoal filters and pull away from the 

holder.

 ¨

3.

Push the new activated charcoal filters onto the holder and 

turn. 

©

4.

Install the metal grease filters.

5.

Reset the saturation indicator; see section 

Saturation 

indicator

.

Trouble shooting

Malfunctions often have simple explanations. Please read the 

following notes before calling the after-sales service.

: 

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried 
out and damaged power cables replaced by one of our trained 
after-sales technicians. If the appliance is defective, unplug the 
appliance from the mains or switch off the circuit breaker in the 
fuse box. Contact the after-sales service.

LED lights

Defective LED lights must only be replaced by the 

manufacturer, their customer service department or a licensed 

technician (electrician).

Malfunction table

--------

%

$

Problem

Possible cause Solution

The appliance 

does not work

The plug is not 

plugged in.

Connect the appliance to 

the electricity supply

Power cut

Check whether other 

kitchen appliances are 

working

Faulty fuse

Check in the fuse box to 

make sure that the fuse for 

the appliance is OK

The button illu-

mination does 

not work.

The control unit 

is faulty.

Call the after

­

sales service.

The lighting 

does not work.

The LED lights 

are defective.

Call the after-sales service.

ª

 or 

’

 appears 

on the display

The grease filter 

or the activated 

charcoal filter is 

saturated.

To clean the grease filter or 

change the activated char-

coal filter, see Chapter 

Cleaning and maintenance

.