NEFF D8642N0GB, Installation Instructions Manual

6

3.

Engage the lug.

4.

Insert the metal grease filters (see
"Removing and inserting the metal 
grease filters").

Replacing the activated carbon filter:

❑

During normal operation (1 to 2 hours
per day) the activated carbon filters
should be replaced approximately 1 x
year.

❑

A replacement filter can be obtained
from any authorized dealer (see optional
accessories).

❑

Use original filters only.

By doing so you will obtain maximum
performance from your extractor hood.

Disposing of the old activated carbon 
filter:

❑

There are no pollutants in the activated
carbon filters. They can therefore be 
disposed of as part of your normal
domestic refuse.

Filters and maintenance

2.

Clean the filters.

3.

Insert the clean filters back into the
hood.

Activated carbon filter:

For neutralizing odours in recirculating
mode.

Caution:

As the filter becomes more and more 
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.

Important:

Change the activated carbon filter promptly
to prevent the risk of fire from the 
accumulation of heat when deep-fat frying
or roasting.

Removing and inserting the metal grease
filters:

1.

Press the catch on the grease filters
inwards and fold the filters down.
At the same time take hold of the under-
side of the grease filters with your other
hand.

Installation and removal:

1.

Remove the metal filters (see "Removing
and inserting the metal grease filters").

2.

Insert the activated carbon filter.