NEFF E14M42B0, Instruction Manual

6

Cleaning the appliance

Clean your appliance before using it for the first time.

1.

Remove the accessories from the cooking compartment.

2.

Completely remove any residual packaging (e.g. chips of 

polystyrene) from the cooking compartment.

3.

Clean the accessories and cooking compartment with hot 

soapy water (see section: Cleaning and care).

4.

Heat with

%

 Top/bottom heat at 240 °C for 30 minutes.

5.

Afterwards, wipe the cooled cooking compartment with hot, 

soapy water.

6.

Clean the outside of the appliance with a soft, damp cloth 

and soapy water.

Operating the appliance

In this section, you can read about 

■

how to switch your appliance on and off

■

how to select an operating mode and temperature

Switching on the appliance

1.

Turn the operating mode selector until the desired operating 

mode is selected.

2.

Turn the temperature selector until the desired temperature is 

selected.

The 

r

 indicator lamp lights up while the appliance is heating 

up and during any subsequent heating.

Switching off the appliance

1.

Turn the operating mode selector back to the

Û

 position.

2.

Turn the temperature selector back to the

Ú

 position.

After the appliance is switched off, the cooling fan may 

continue to run.

Switching the hob on and off

Your hob comes with its own instructions for use. This contains 

important safety information, detailed set-up instructions and a 

lot of information on care and cleaning.

Hotplate knobs

You can use the four hotplate knobs to set the heat output of 

the individual hotplates.

Electronic clock

In this section, you can read about

■

how to set the timer

■

how to switch your appliance off automatically (cooking time 

and end of operation)

■

how to switch your appliance on and off automatically (preset 

operation)

■

how to set the time

■

find out how to activate rapid heat up

Clock display

Setting

Meaning

ý

Off position

The hotplate is turned off

Heat settings 1 

­

 9

The heat output of the hotplate. 

1 = lowest  output 

9 = highest  output 

The intermediate settings between 

heat setting 2 and 5 are indicated with 

a •dot.

ö

Zone activation

Activates the large dual-circuit hot-

plate or the extended cooking zone 

(not available on all hotplates).

&ORFNIXQFWLRQEXWWRQ

5RWDU\VHOHFWRU