en
30
Tips for saving energy
■
Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
■
Select 560 mm cavity depth.
A smaller cavity depth will result in
a higher energy consumption.
■
Do not block the ventilation openings
in the appliance.
■
The ice packs slow down the thawing
process of the frozen food in the event
of a power failure or malfunction.
Place the ice packs directly on
the food in the top compartment.
■
Open the appliance as briefly as
possible!
The briefer the appliance door is
opened, the lower the ice formation
on the freezer shelves.
■
Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
■
Regularly defrost the freezer
compartment to remove the layer
of frost.
A layer of hoarfrost will impair
refrigeration of the frozen food
and increase power consumption.
■
Occasionally clean the rear
of the appliance to prevent an
increased power consumption.
■
The arrangement of the fittings
does not affect the energy rating of
the appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the installation cavity with
a spirit level. To do this, use the
height-adjustable feet of the cavity
or place something underneath.
Containers or storage areas wobble
or stick
Please check the removable parts
and re-insert them correctly if required.
Receptacles are touching each other
Move the receptacles slightly away from
each other.
Summary of Contents for G5624X8
Page 81: ...1 2 3 1 5 6 7 S 1 3 5 7 1 2 3 5 4...
Page 82: ...4 5 6 7 8 2 6 4 8 6 12 B A...
