8
Factory settings
Upon leaving the factory, the appliance
has been supplied with the following
settings:
–
Fascia language:
English
–
Temperature unit:
°C
–
The freezer compartment
temperature:
–
18 °C
Note
The factory settings (language, tempe-
rature unit) can be changed in the setup
mode.
Switching on
the appliance
z
Press the on/off button
.
The appliance starts to cool down when
switched on for the first time. When the
door is opened, the interior light comes
on.
Note
The preset temperatures (factory
settings) are reached after approx.
2–8 hours. Do not put any food in the
appliance beforehand.
To change the set temperatures –>
see “Setting the temperature”, page 8.
Selecting the
temperature
The temperature can be set from
–16
°
C to –24
°
C. We recommend
a setting of –18
°
C.
The temperature setting can be
changed using the
(warmer) or
(cooler) setting buttons.
The temperature can be set at 1
°
C
intervals.
To set the temperature:
z
Active the setup mode using the
or buttons.
The symbol
is
displayed.
z
Set the desired temperature using
the
(warmer) or
(cooler) setting
buttons.
Set the language
When the appliance is operated,
all messages are displayed in fascia
in English.
Alternatively, the display languages can
be selected corresponding to the table
on page 10.
In order to change the display language:
z
Press setup button
.
z
Press the selection button
,
until
ENGLISH
is displayed.
z
Press the or setting button,
until the desired language is
displayed.
z
Press the
setup button
, in order
to store the settings. The set
temperature is displayed again in
the fascia.
Door alarm
If an appliance door is left open, an
alarm signal is emitted after one minute
and a corresponding alarm message
appears in the fascia.
Close the door.
Pressing the alarm button
switches
the signal off. If the door is not closed
properly again, the alarm signal will be
emitted after one minute once more.
“super” freezing
The “super” freeze function is ideal
when storing larger amounts of food.
It should be pre-activated 4–6 hours
before storing. 24 hours are necessary
when using the maximum freezer
capacity fully.
This function is activated by pressing
the “super” freezing button
.
1.
The
appears in the fascia
under “super” freezing temperature.
The super function ends:
–
by pressing the “super” freezing
button
again;
–
by activating the eco function;
–
by activating the holiday mode;
–
by activating the sabbatical mode.
After 2 days the appliance auto-
matically switches back to the
temperature which was set before
“super” freezing.
