Basic operation
en
13
Basic operation
7 Basic operation
Basic operation
7.1 Switching on the appli-
ance
1.
Press .
a
The appliance begins to cool.
a
A warning signal sounds and the
temperature display flashes be-
cause the freezer compartment is
still too warm.
2.
Switch off the warning signal using
.
a
The temperature lights up as soon
as the set temperature is reached.
3.
Set the required temperature.
→
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the temperature has
been reached.
¡
The front and top panels of the
housing are temporarily heated
slightly. This prevents condensa-
tion in the area of the door seal.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Press .
7.4 Setting the temperature
Setting the freezer compartment
temperature
▶
Press repeatedly until the temper-
ature display shows the required
temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
Additional functions
8 Additional functions
Additional functions
8.1 Automatic Super freezing
The automatic Super freezing auto-
matically switches on when warm
food is placed in the compartment.
With automatic Super freezing, the
freezer compartment cools down to a
much lower temperature than for nor-
mal mode.
If the automatic Super freezing is
switched on,
lights up and in-
creased noises may occur.
After operation, the appliance
switches from automatic Super freez-
ing to normal operation.
Cancelling automatic Super freezing
▶
Press repeatedly until the temper-
ature display shows the required
temperature.
8.2 Manual Super freezing
With Super freezing, the freezer com-
partment cools so that it as cold as
possible.
Switch on Super freezing four to
six hours before placing food weigh-
ing 2 kg or more into the freezer
compartment.
