NEFF GI121 Series, User Manual

en

   Installation and connection

8

Before using your appliance 

for the first time

1.

Remove information material, 

adhesive tape and protective film.

2.

Clean the appliance.  

~

 "Cleaning" on page 15

Electrical connection

Caution!

Do not connect the appliance to 

electronic energy saver plugs.

Note:  

You can connect the appliance 

to mains-controlled and sine-controlled 

inverters.

Mains-controlled inverters are used for 

photovoltaic systems which are 

connected directly to the national grid. 

Sine-controlled inverters must be used 

for isolated applications. Isolated 

applications, e.g. on ships or in 

mountain lodges, which are not 

connected directly to the national grid.

1.

After installing the appliance, wait at 

least 1 hour before connecting it to 

prevent damaging the compressor.

2.

Connect the appliance via a 

correctly installed socket.

The socket must comply with the 

following data:

Outside Europe: Check whether the 

indicated current type of the 

appliance corresponds with the 

values of your power supply. 

Appliance specifications are on the 

rating plate. 

~

 "Getting to know your appliance" 

on page 9

3.

Connect the appliance to a socket 

near the appliance.

The socket must also be freely 

accessible following installation of 

the appliance.

:

Warning

Risk of electric shock! 

If the length of the mains cable is 

inadequate, never use multiple 

sockets or extension leads.Instead, 

please contact Customer Service for 

alternatives.

Socket with 

220 V ... 240 V

Conductor

50 Hz

Fuse

10 A ... 16 A