en
Basic operation
40
Making ice cubes
1.
Fill the ice cube tray with water up
to ¾ and place in the freezer com-
partment.
If the ice cube tray is stuck to the
freezer compartment, loosen with a
blunt implement only (e.g. spoon
handle).
2.
To loosen the ice cubes, twist the
ice cube tray slightly or hold briefly
under flowing water.
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Switching on the appliance
1.
Press .
a
The appliance begins to cool.
a
A warning signal sounds and
lights up because the freezer com-
partment is still too warm.
2.
Switch off the warning signal with
.
a
goes out as soon as the set
temperature has been reached.
3.
Set the required temperature.
→
Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put in any food in the appli-
ance until the temperature is
reached.
¡
The front panels of the housing are
temporarily heated slightly. This
prevents condensation in the area
of the door seal.
¡
When you close the door of the
freezer compartment, a vacuum
may be created and you may not
be able to open the freezer door
again immediately. Wait a moment
until the vacuum is offset.
Switching off the appliance
▶
Press .
a
The appliance stops cooling.
Setting the temperature
After you have switched on the appli-
ance, you can set the temperature.
Setting the freezer compartment
temperature
▶
Press / repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
Additional functions
Additional functions
Find out which additional functions
which can be used for your appli-
ance.
Automatic Super freezing
Automatic Super freezing automatic-
ally switches on when warm food is
placed in the freezer.
With automatic Super freezing, the
freezer compartment cools down to a
much lower temperature than for nor-
mal mode. This freezes food quickly
right through to the centre.
If the automatic Super freezing is
switched on,
lights up and in-
creased noises may occur.
Summary of Contents for GI7.13 Series
