NEFF I91VT44N0, Instruction Manual

en

    Cleaning and maintenance

10

Cooking with gas

:

Warning – Risk of fire! 

Fatty deposits in the grease filter may catch fire. If the 

appliance is to be operated next to a gas-fired 

appliance, a gas deflector must always be fitted before 

you begin cooking.

Note: 

The gas deflector reduces deflection/disruption 

of the gas flames from the burners on the cooktop and 

prevents them from being blown out by draughts.

:

Warning – Risk of burns! 

The appliance will become hot during operation.Allow it 

to cool down before touching the fan flaps, gas 

deflector and other components.

Note: 

When the gas deflector is fitted, select intensive 

mode or setting 3. This improves the extraction 

performance of the worktop-mounted ventilation 

system.

Note: 

When using pans for cooking, use the 

appropriate pan lid. If necessary, place the lid on the 

pan at a slight angle, with the gap facing the worktop-

mounted ventilation system. This improves the 

extraction behaviour of the table ventilation.

2

Cleaning and maintenance

Cleaning 

and maint

enance

:

Warning – Risk of burns! 

The appliance becomes hot during operation. Allow the 

appliance to cool down before cleaning.

:

Warning – Risk of electric shock! 

Penetrating moisture may result in an electric shock. 

Clean the appliance using a damp cloth only. Before 

cleaning, pull out the mains plug or switch off the circuit 

breaker in the fuse box.

:

Warning – Risk of electric shock! 

Do not use any high-pressure cleaners or steam 

cleaners, which can result in an electric shock.

:

Warning – Risk of injury! 

Components inside the appliance may have sharp 

edges. Wear protective gloves.

Cleaning agents

To ensure that the different surfaces are not damaged 

by using the wrong cleaning agent, observe the 

information in the table. Do not use any of the following:

■

Harsh or abrasive cleaning agents,

■

Cleaning agents with a high alcohol content,

■

Hard scouring pads or cleaning sponges,

■

High-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the 

cleaning agents.

Area

Cleaning agent

Stainless steel

Hot soapy water: 

Clean with a dish cloth and then dry with a 

soft cloth.
Clean stainless steel surfaces in the grind 

direction only.
Special stainless steel cleaning products are 

available from our after-sales service or from 

specialist retailers. Apply a very thin layer of 

the cleaning product with a soft cloth.

Painted surfaces

Hot soapy water: 

Clean using a damp dish cloth and dry with a 

soft cloth/towel.
Do not use any stainless steel cleaners.

Aluminium and plastic Glass cleaner: 

Clean with a soft cloth.