en
Operating the appliance
8
Controls
Control panel
Operating buttons
Indicators/symbols
Before using the appliance for the first time
Before you can use your new appliance, you must apply
certain settings.
Follow the instructions below before using the
appliance for the first time:
Notes
■
Thoroughly clean the appliance and accessories.
■
If your hob is a gas hob, fit the gas deflector to the
appliance. To do this, refer to the printed
supplement.
Initial use
Switching over the display for circulating-air mode
For circulating-air mode, the electronic controller
indicator must be switched over accordingly:
1.
Check whether the extractor hood is connected and
switched off.
2.
Press and hold the
@
button until
’
flashes twice on
the display panel.
This will switch the electronic controller over to
circulating-air mode.
Switching over the display for exhaust air mode
1.
Check whether the extractor hood is connected and
switched off.
2.
Press and hold the
@
button until
’
flashes once on
the display panel.
This will switch the electronic controller over to air
extraction mode.
Button
Explanation
#
Switches the extractor hood on and off
9
Switches on the run-on function
A
Reduces the power level/resets the
metal grease filter and activated
charcoal filter saturation indicators
@
Increases the power level
Indicator/sym-
bol
Explanation
9
Run-on function
7
Metal grease filter saturation indicator
7
+
’
Activated charcoal filter saturation
indicator
‚
Power level 1
ƒ
Power level 2
„
Power level 3
˜
Intensive mode
Summary of Contents for I91VT44N0
Page 1: ...Instruction manual Extractor hood I91VT44N0 I91VT44N0B ...
Page 2: ......
Page 15: ...6 ...