NEFF I92CM67N0, Instruction Manual

8

Removing metal grease filter

1.

Press the lock on the filter cover.

Note: 

The filter cover is heavy. Grip the filter cover with two 

hands.

2.

Open the filter cover downwards.

Note: 

Open the filter cover slowly and without any jerky 

movements.

3.

Press the lock on the metal grease filters.

Note: 

To avoid causing damage, do not bend the metal 

grease filter.

4.

Take the metal grease filter out of the holder.

Note: 

Fat may accumulate in the bottom of the metal grease 

filter. Hold the metal grease filter level to prevent fat from 

dripping out.

5.

Clean the appliance from the inside.

6.

Clean the metal grease filter and let it dry before re-fitting.

Installing the metal mesh grease filter

1.

Insert metal grease filter.
While doing this, place your other hand under the metal 

grease filter.

2.

Fold up metal grease filter and engage the lock.

3.

Close the filter cover upwards.

Note: 

Ensure that the filter cover lock engages correctly.

Trouble shooting

Malfunctions often have simple explanations. Please read the 

following notes before calling the after-sales service.

: 

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried 
out and damaged power cables replaced by one of our trained 
after-sales technicians. If the appliance is defective, unplug the 
appliance from the mains or switch off the circuit breaker in the 
fuse box. Contact the after-sales service.

LED lights

Defective LED lights must only be replaced by the 

manufacturer, their customer service department or a licensed 

technician (electrician).

Malfunction table

--------

Fault

Possible cause

Solution

The appliance does not work

The plug is not plugged into the mains

Connect the appliance to the power 

supply

Power cut

Check whether other kitchen appliances 

are working

The fuse is faulty

Check in the fuse box to make sure that 

the fuse for the appliance is in working 

order

The lighting does not work

The bulbs are faulty

Call the after-sales service

1,2 and 

7

 light up.

The grease filter is saturated.

Clean the filter; see section 

Cleaning 

and maintenance

.

3, 

˜

 and 

7

 light up.

The activated charcoal filter is saturated. Replace the filter; see the 'CleanAir air 

recirculation module' printed supple-

ment.