en
Time-setting options
14
O
Time-setting options
Time-setting options
Your appliance has different time-setting options.
An audible signal sounds once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by pressing the
0
button.
Note:
If you have set a time-setting option, the time
interval increases if you set a higher value. Example:
You can set a cooking time of up to one hour in one-
minute increments; for cooking times over one hour,
you can set a cooking time in five-minute increments.
Setting the timer
The timer can be set when the appliance is switched on
or off. It has its own audible signal so that you can tell
whether it is the timer duration or a cooking time that
has elapsed.
Tip:
If the set timer duration is the duration for which
you want to cook your food, use the cooking time. The
appliance then switches off automatically.
1.
Press the
0
button repeatedly until the
Q
symbol is
highlighted.
2.
Use the
(
and
)
buttons to set the timer duration.
– Default value for the
(
button = 5 minutes
– Default value for the
)
button = 10 minutes
The setting is applied automatically. After a few
seconds, the timer duration will start to count down.
Note:
Once the set time has elapsed, an audible signal
will sound. To stop the timer, press the
0
button.
Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. The function can only be
used in combination with a type of heating.
1.
Set the heating type and temperature for the main
oven
r
.
2.
Press the
0
button repeatedly until the
x
symbol is
highlighted.
3.
Use the
(
and
)
buttons to set the cooking time.
– Default value for the
(
button = 10 minutes
– Default value for the
)
button = 30 minutes
The setting is applied automatically. The appliance
starts to heat after a few seconds. The cooking time
counts down in the display.
Once the cooking time has elapsed, an audible signal
sounds and the appliance brings the operating mode to
an end automatically.
To switch off, turn the function selector back to the "Off"
position.
Setting the end time
You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
■
Ensure that food is not left in the cooking
compartment for too long as it may spoil.
■
Do not adjust the end time once the appliance is
already in operation. Otherwise the cooking result
would no longer be satisfactory.
1.
Place the food onto the appropriate accessory in the
cooking compartment and close the appliance door.
2.
Set the heating type and temperature for the main
oven
r
.
3.
Press the
0
button repeatedly until the
x
symbol is
highlighted.
4.
Use the
(
and
)
buttons to set the cooking time.
Time-setting option Use
Q
Timer
The timer functions like an egg timer. It runs
independently of the appliance when it is
heating and does not affect the appliance.
x
Cooking time
Main oven
r
: Once the set cooking time has
elapsed, the appliance automatically stops
heating.
y
End
Main oven
r
: Enter a cooking time and the
required end time. The appliance starts up
automatically so that it finishes cooking at the
required time.
0
Time
Set the time on the clock, e.g. after a power
cut, or change it, e.g. from summer time to
winter time.
