en
Rails
18
Attaching the rails
The rails only fit on the right or the left side. For both
rails, ensure that the curved rods are at the front.
1.
First, insert the rail in the middle of the rear socket
‚
,
until the rail rests against the cooking compartment
wall, and push it back
ƒ
(figure
!
).
2.
Then insert the rail into the front socket
„
, until the
rail also rests against the cooking compartment wall
here, and press it downwards
…
(figure
"
).
Detaching and refitting the rails
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the shelf supports
1.
Lift the shelf support slightly at the front
‚
and
detach it
ƒ
(fig.
!
).
2.
Then pull the whole shelf support towards you and
remove it (fig.
"
).
Clean the shelf supports with washing-up liquid and a
sponge. For stubborn dirt deposits, use a brush.
Refitting the shelf supports
The shelf supports are designed to fit on either the right-
or the left-hand side (not both).For each of the shelf
supports, make sure that the hooks at the back are at
the top.
1.
First, push the shelf support into the middle of the
rear socket
‚
until the shelf support rests against the
cooking compartment wall, and then push it back
ƒ
(fig.
!
).
2.
Then push the shelf support into the front socket
„
until the shelf support also rests against the cooking
compartment wall, and then press it downwards
…
(fig.
"
).
F
G
2
D
E
1
F
G
2
E
D
1
G
F
2
E
D
1
