Preventing material damage
en
27
Preventing material damage
Preventing material dam-
age
Preventing material damage
ATTENTION!
¡
Using the base, runners or appli-
ance doors as a seat surface or
climbing surface may damage the
appliance.
▶
Do not stand or support yourself
on the base, runners or doors.
¡
Contamination with oil or fat may
cause plastic parts and door seals
to become porous.
▶
Keep plastic parts and door
seals free of oil and grease.
¡
Metal or metal-style parts in the ap-
pliance may contain aluminium.
Aluminium reacts when it comes
into contact with acidic foods.
▶
Do not store unpackaged food
in the appliance.
Environmental protection and saving energy
Environmental protection
and saving energy
Environmental protection and saving energy
Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
¡
Keep the appliance out of direct
sunlight.
¡
Install the appliance as far away as
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 mm clearance to
oil or solid-fuel cookers.
¡
Never cover or block the exterior
ventilation grilles.
Saving energy during use
Note:
The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
¡
Open the appliance only briefly
and then close it carefully.
¡
Never cover or block the interior
ventilation openings or the exterior
ventilation grilles.
¡
Transport purchased food in a
cool bag and place in the appli-
ance quickly.
¡
Allow warm food and drinks to
cool down before storing them.
¡
Thaw frozen food in the refrigerator
compartment to utilise the low tem-
perature of the food.
¡
Always leave some space between
the food and to the back panel.
Installation and connection
Installation and connec-
tion
Installation and connection
Scope of delivery
After unpacking all parts, check for
any transport damage and for com-
pleteness of delivery.
If you have any complaints, contact
your dealer or our "after-sales ser-
vice" →
.
The delivery consists of the following:
¡
Built-in appliance
Summary of Contents for K151 Series
Page 2: ...5 7 4 1 6 2 3 1 1 2 3 4 2...
Page 3: ...3 4 5 6 7 8...
Page 26: ...en Safety 26 Call after sales service Page 36...
