Cleaning and servicing
en
33
▶
Do not use stainless-steel clean-
ing agents on the outside of the
appliance.
¡
If liquid gets into the drainage
hole, the evaporation pan may
overflow.
▶
The rinsing water must not get
into the drainage hole.
¡
If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
▶
Never clean fittings and access-
ory in the dishwasher.
1.
"Prepare the appliance for clean-
ing." →
2.
Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3.
Dry thoroughly with a soft, dry
cloth.
4.
Insert the fittings.
5.
Electrically connect the appliance.
6.
7.
Putting the food into the appliance.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
▶
Carefully clean the condensation
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶
Lift the shelf, pull it out, lower it
and swing it out to the side.
→ Fig.
Removing door rack
▶
Lift the door rack and remove it.
→ Fig.
Removing the fruit and vegetable
container
1.
Pull out the fruit and vegetable
container as far as it will go.
2.
Lift the fruit and vegetable con-
tainer at the front and remove it
.
Summary of Contents for K151 Series
Page 2: ...5 7 4 1 6 2 3 1 1 2 3 4 2...
Page 3: ...3 4 5 6 7 8...
Page 26: ...en Safety 26 Call after sales service Page 36...
