en
51
Appliance self-test
Your appliance features an automatic self-test program
which shows you sources of faults which
may be repaired by customer service only.
Starting the appliance self-test
m
Caution
As water or ice may be dispensed during the test, keep
a glass in the dispenser unit while the self-test is
running.
1. Switch off the appliance and wait 5 minutes.
2. Switch the appliance on again.
3. Simultaneously press the setting b and - for
5 seconds.
The self-test programme starts. If “E..” is indicated on
the display panel, an error has occurred. If this fault is
displayed, inform customer service.
Ending the appliance self-test
Simultaneously press the setting b and - again
for 5 seconds.
Customer service
Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
GB
0844 892 8989
Calls from a BT landline
will be charged at up to
3 pence per minute. A call
set-up fee of up to 6 pence
may apply.
IE
01450 2655
0.03 € per minute at peak.
Off peak 0.0088 € per
minute.