en
Additional functions
16
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The housing around the freezer
compartment is temporarily heated
slightly. This prevents condensa-
tion in the area of the door seal.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
¡
The temperature in the appliance
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
▶
Press and hold
for
three seconds.
7.4 Setting the temperature
Tip:
Via the Home Connect app, you
can set temperatures that are not
shown on the control panel.
Setting the refrigerator
compartment temperature
▶
Press the required temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the freezer compartment
temperature
▶
Press the required temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
Additiona l func tions
8 Additional functions
Additiona l func tions
Find out which additional functions
can be used for your appliance. Addi-
tional functions can be set via the
Home Connect app.
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note:
When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
▶
Press
(Refrigerator compart-
ment).
a
(Refrigerator compartment)
lights up.
Note:
After approx. 6 hours, the ap-
pliance switches to normal operation.
Switching off Super cooling
▶
Press
(Refrigerator compart-
ment).
Summary of Contents for KB7966 Series
Page 1: ...Fridge freezer en Information for Use KB7966...
Page 33: ......
Page 34: ......
Page 35: ......
