en
24
Switching on
the appliance
Fig.
2
Switch on the appliance with the
On/Off button 1.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■
After the appliance has been switched
on, it may take several hours
until the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
■
While the refrigeration unit is running,
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the
drainage channel and is carried to
the refrigeration unit where it
evaporates. Fig.
3
■
The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig.
2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated on
temperature display 4.
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes.
Close the door to switch off the warning
signal.
Switching off the alarm
Fig.
2
Press the alarm button 5 to switch off
the warning signal.
Usable capacity
Information on the usable capacity
can be found inside your appliance on
the rating plate. Fig.
/
Summary of Contents for KI12 Series
Page 79: ...1 2 C Alarm Super 1 2 3 4 5 Super Alarm...
Page 80: ...3 4 5 6 7 8...
Page 81: ...9...
Page 82: ...FD Nr E Nr...