Installation and connection
en
29
--------
Before using your appliance
for the first time
1.
Remove information material,
adhesive tape and protective film.
2.
Clean the appliance.
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
Note:
You can connect the appliance
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
1.
After installing the appliance, wait at
least 1 hour before connecting it to
prevent damaging the compressor.
2.
Connect the appliance via a
correctly installed socket.
The socket must comply with the
following data:
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
"Getting to know your appliance"
3.
Connect the appliance to a socket
near the appliance.
The socket must also be freely
accessible following installation of
the appliance.
:
Warning
Risk of electric shock!
If the length of the mains cable is
inadequate, never use multiple
sockets or extension leads.Instead,
please contact Customer Service for
alternatives.
Defrost the freezer compartment regularly.
A layer of hoarfrost or ice in the freezer compart-
ment impairs refrigeration of the frozen food and
increases power consumption.
Close the freezer compartment door properly.
The freezer compartment will become covered in
thick ice. If greater demands are made of the appli-
ance, the power consumption will increase.
Using the appliance
Socket with
220 V ... 240 V
Conductor
50 Hz
Fuse
10 A ... 16 A
Summary of Contents for KI842 Series
Page 111: ...2 h X P H C h e e s e 3 C C Alarm Super Super Alarm...
Page 112: ...1 2...
Page 113: ...1 3 2 1 2 3...
Page 114: ...2 3 4 3 1 4 2 1...
