Alarm
en
17
1.
Push the door in the middle.
a
The automatic door-opening aid
extends and opens the door
slightly.
2.
Manually open the door.
If you do not open the door any
further within 3 seconds, the auto-
matic door-opening aid retracts
and the door closes.
Setting the compressive force of
the automatic door-opening aid
The compressive force is the force
that you must apply in order to trig-
ger the automatic door-opening aid.
1.
Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2.
Open the door and press and hold
for 2 seconds.
3.
Press / repeatedly until the re-
quired compressive force is dis-
played.
Low compress-
ive force
Medium com-
pressive force
High compress-
ive force
a
The compressive force of the auto-
matic door-opening aid is set and
the temperature that was previ-
ously set is displayed.
Switching off the automatic door-
opening aid
1.
Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2.
Open the door and press and hold
for 2 seconds.
3.
Press repeatedly until the temper-
ature display shows .
a
Automatic door opening is
switched off and the temperature
that was previously set is dis-
played again.
Switching on the automatic door-
opening aid
1.
Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2.
Open the door and press and hold
for 2 seconds.
3.
Press repeatedly until the temper-
ature display shows the required
compressive force.
→
"Setting the compressive force
of the automatic door-opening
aid", Page 17
a
The automatic door-opening aid is
switched on with the appropriate
compressive force and the temper-
ature display shows the temperat-
ure that was previously set.
9 Alarm
9.1 Door alarm
If the appliance door is open for a
while, the door alarm switches on.
A warning tone sounds.
Switching off the door alarm
▶
Close the appliance door or press
.
a
The warning tone is switched off.
