en
Home Connect
22
4.
Follow the instructions in the
Home Connect app until the pro-
cess is complete.
a
Once successfully connected,
is
shown in the temperature dis-
play (freezer compartment).
5.
If the temperature indicator (freezer
compartment) shows , the appli-
ance was able to establish a con-
nection to the Home Connect app
(Wi-Fi).
‒
In the Home Connect app,
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
‒
Repeat the process.
6.
If the temperature display (freezer
compartment) shows , reset the
Home Connect settings.
→
10.4 Checking the signal
strength
You should check the signal strength
if no connection could be estab-
lished.
1.
Press .
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows .
a
The temperature display (freezer
compartment) shows a value
between (no reception) and (full
reception).
Note:
The signal strength should be
at least .
Improving the reception
If the signal strength is too weak, the
connection may be interrupted.
▶
Carry out one of the solution op-
tions:
‒
Place the router and refrigerator
closer together.
‒
Ensure that the connection is
not interfered with by screening
walls.
‒
Install a repeater to strengthen
the signal.
10.5 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note:
If updates are available, the
temperature display (refrigerator
compartment) shows
.
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
1.
Press .
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows
and the temperat-
ure display (freezer compartment)
shows .
3.
Press / (Freezer compartment).
a
The temperature display (freezer
compartment) shows an animation.
a
The update is installed.
a
The control panel is locked during
the installation.
a
If the installation is successful, the
temperature display (freezer com-
partment) shows
.
4.
If the temperature indicator (freezer
compartment) shows , the appli-
ance was unable to install the up-
date.
‒
Repeat the process at a later
point.
