en
Troubleshooting
32
Fault
Cause and troubleshooting
The temperature dis-
play (freezer compart-
ment) flashes.
The temperature in the freezer compartment was too
warm.
1.
Press
.
a
The temperature display (freezer compartment)
briefly indicates the warmest temperature reached
in the freezer compartment. The temperature dis-
play (freezer compartment) then indicates the set
temperature again.
2.
Press
.
a
The temperature display (freezer compartment) no
longer flashes.
The temperature dis-
play (freezer compart-
ment) flashes, a warn-
ing signal sounds and
lights up.
Different causes are possible.
▶
Press
.
a
The alarm is switched off.
The appliance door is open.
▶
Close the appliance door.
The exterior ventilation grilles are blocked.
▶
Remove any obstructions from in front of the exter-
ior ventilation grilles.
Larger quantities of fresh food have been put in.
▶
Do not exceed the max. freezing capacity.
→
The temperature dif-
fers greatly from the
setting.
Different causes are possible.
1.
2.
Switch the appliance back on after five minutes.
→
‒
If the temperature is too warm, check the temper-
ature again after a couple of hours.
‒
If the temperature is too cold, check the temper-
ature again on the following day.
The appliance hums,
bubbles, buzzes,
gargles, clicks or
crackles.
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
Automatic defrosting is running.
No action required.
The appliance makes
noises.
Fittings wobble or stick.
▶
Check the removable fittings and, if required, re-
place these.
Bottles or containers are touching.
▶
Move the bottles or containers away from each
other.