NEFF KS83 Series, Instructions For Use Manual

en

7

Installation location

A dry, well ventilated room is suitable as 

an installation location. The installation 

location should not be exposed to direct 

sunlight and not placed near a heat 

source, e.g. a cooker, radiator, etc. If 

installation next to a heat source is 

unavoidable, use a suitable insulating 

plate or observe the following minimum 

distances from the heat source:

■

3 cm to electric or gas cookers.

■

30 cm to an oil or coal-fired cooker.

The floor of the installation location must 

not give way; if required, reinforce floor. If 

the floor is uneven, compensate with 

supports. 

Distance from wall

Appliances with fitted handles must be 

situated at least 525 mm from the wall 

on the hinge side so that the door can 

be opened by 160°.

Installing appliances 

next to each other

Fig. 

.

When installing two appliances, ensure 

that the refrigerator is on the left and the 

freezer is on the right. 
The right side panel of the refrigerator is 

heated slightly. This prevents 

condensation from forming between the 

appliances.

Attaching spacers

Fig. 

/

1. On the right side of the refrigerator 

degrease the adhesive areas with 

petroleum ether or spirit. 

2. Stick spacers in all four corners at 

a distance of 5 cm from the side 

edges to ensure a minimum gap 

between the appliances.

Note

You can purchase a connection set from 

your dealer.

Changing over 

the door hinges

The door hinges cannot be changed 

over on this appliance.

525 mm

160°