Cleaning and maintenance
en
41
Terminating the programme
(Reset)
Terminating the programme
1.
Open the door.
2.
Press the START button
)2
and
hold for 3 seconds
The display window at the top
@
and the front display *
):
show:
"Program was terminated".
3.
Close the door.
The programme sequence lasts
approx. 1 min. The display window
at the top
@
shows: “Finished”.
4.
Open the door.
5.
Switch off ON/OFF switch
(
.
6.
Close the door.
* depending on the features of your
dishwasher
Changing the programme
When the START button
)2
has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).
2
Cleaning and
maintenance
Cleaning and maintenance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall status of the
dishwasher
*The interior of your dishwasher is
predominantly self-cleaning. In order to
remove deposits, your dishwasher
automatically changes the running of
the programme (such as by increasing
the cleaning temperature) at certain
intervals. This will lead to higher
consumption values when running this
programme.
*Depending on the features of your
dishwasher
If you should find deposits in the
interior of the dishwasher in spite of
this, remove these deposits as
follows:
1.
Fill the detergent dispenser
9:
with
detergent.
2.
Select the programme with the
highest temperature.
3.
Start the programme without dishes.
:
Warning
Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Summary of Contents for S517T80D6E
Page 1: ...en Instruction manual Dishwasher S...
Page 2: ...5HVHW VHF 6HWXS VHF...
